The power ON requires only a few seconds and the lap times are calculated with a max 2/100 sec of tolerance.
the most precise and easy way to get lap times”
Aim Solo 2 screen can be backlit in one of the seven available colors:
Find Your Track Easily and Quickly
Solo 2 can rely on a database of more than 3,000 tracks all over the world: as soon as it switches on, Solo 2 identifies its position, recognizes the starting line coordinates of the track and starts sampling lap times. In the event that the track is not in the database then no problem. Solo 2 realises it and enters into the autolearning mode, automatically understands the characteristics of the track and gives the lap time anyway.
Even the Predictive Lap Time is Much More Reliable
The Aim Solo 2 configurable RGB LEDs, will give you a clear and fast indication of the comparison with your best lap. Solo 2 Race Mode Selection
Solo 2 can manage different types of races, Speed races in a closed circuit, Point to-point races, Regularity, Performance tests (0-100 km/h etc.) In each of these configurations, Solo 2 gives you the correct information during the test and powerful data review immediately after each session.
Solo 2 Race Data Recall on ScreenAt the end of your test, you can quickly review all the key information on your display.
Solo 2 Wi-Fi Communication with the PC
Wi-Fi connection is easy and fast without connectors or cables, Simply the best way to configure your Solo 2, to manage the track database and to download the data to your PC.
SmartyCam HD Connection
Solo 2 - The perfect connection Get all the data from your ECU, merge them with the GPS information and transmit everything to the SmartyCam HD, that will show them in graphical overlay in the video.
Find your track with the powerful GPS technology
Select Your Race Mode
Speed Track: Circuit
This is the typical session (race or test) on a closed circuit. Operating Solo is extremely simple and intuitive: it automatically loads start/finish line coordinates, and then calculates and displays laptimes. Lap times can be displayed is different ways:
Rolling Lap Time
Static Lap Time
- Predictive lap time, what the lap time will be, calculated during the current lap
- Predictive lap time, time gained or lost, compared to the best lap in memory
Track: Point to Point
With this type of track, the starting position is different from the finish position. The coordinates of both points need to be set and this operation can be done using Solo, or with your PC using GPSManager software. Then, the laptimes can be displayed in the same ways as the Circuit style of track as shown above.
In Regularity Races, Solo displays a lap time as the difference vs. a reference lap. Typically this is displayed on the second lap after one lap is stored in memory. Aim Solo will continuously show the predictive lap time, or the difference (+ or -) between the predicted and the target lap time.
Performances races are acceleration tests of a defined distance or until a speed value is reached. If Imperial units are selected, it is possible to choose among: 1/4 miles, 1/8 miles and 0-60 mph. If the metric units are selected, it is possible to choose among: 100 m, 400 m, 1000 m, 0-100 km/h, 0-160 km/hm.
At the end of each Performance Test, a test summary is automatically displayed. The data is also available to analyze in the powerful Race Studio 2 professional software, which is included with Solo.
Choose Your Lap Mode
Aim Solo GPS Car Lap Timer shows different lap time modes, fully configurable:
- Rolling lap time
- Static lap time
- Predictive lap time (screenshot 1), calculated during the current lap
- Predictive lap time(screenshot 2), calculated as difference between the above and the best lap
- Best lap
Data Download To Your PC
You can at any time recall and review the recorded data, in a very simple way.Connecting Solo to your PC, your data can be analyzed and shown in tables, graphs and histograms using the powerful Race Studio 2 professional software, which is included with Solo.
At the end of your test, you can review all the key information on Solo. To review data stored in the memory, press the MEM button and the Data Recall page will appear.
Solo displays the data as shown for the "Speed" and "Regularity" modes and may include multiple pages. "Performance" mode data is displayed in a single Data Recall page as shown on the left.
The Data Recall page information will depend on the Race Mode selected.
In the "Speed" mode, the three fastest laps will be displayed, in the "Performance" mode, the significant splits based on the Units selected will be displayed, and in the "Regularity" mode, the differences vs. the reference lap will be displayed.
Data download to your PC
All of the GPS and ECU based data recorded on Solo can be deeply analyzed with the powerful Race Studio 2 professional software. Graphs, histograms and tables will help you understand your performance at all positions on the track.
Do you need data from your ECU?
Then you need the SOLO DL
Uses GPS Technology For Lap Times
- Suitable For Circuit Racing, Drag Racing, Sprints & Hillclimbs
- Connect to SmartCam HD Or SmartyCam HD GP
- No External Beacon Required
- In Built Accelerometer
- User Selectable Screen Displays
- Predictive Lap Timing
- Inbuilt Track Database
- Backlit Easy To Read Display
- Includes Data Analysis Software
- Display: Graphical
- Display resolution:128x64 pixels
- Display pages: Up to 8 freely configurable
- Back light:7 configurable RGB colors
- Shift lights/alarm LEDs:10 configurable RGB LEDs
- Integrated track database:Yes
- Inertial platform:Internal 3 axis ±5G accelerometer + 3 axis gyro + 3 axis magnetometer
- Wi-Fi connection: Yes
- GPS: 10 Hz External power:12 V
- Memory: 4 GB
- Battery type: Rechargeable Lithium
- Pushbuttons: Metallic
- Dimensions: 98.0x73.7x30.2 mm
- Weight: 240 g, battery included
- Waterproof: IP65
- Aim Solo 2 GPS Car Racing Trackday Lap Timer
- Power cable with car lighter socket,
- Power cable with AC adapter,
- Mounting bracket with screws,
- User manual,
- Software installation CD,
- Aim sticker