דלג לפרטי המוצר
1 שֶׁל 1

Aim Spark Plug Inductive RPM Bike Adaptor

SKU: MXL-RPM-IP

מחיר רגיל
£75.00
מחיר רגיל
מחיר מבצע
£75.00

+ מע"מ (בריטניה בלבד)

Carbon-neutral shipping with Shopify Planet
Carbon-neutral shipping on all orders
Powered by Shopify Planet

Spark Plug Inductive RPM Adaptor


The Aim RPM Adaptor has been designed for single cylinder 2 or 4-stroke engines.


Key Features:


  • Spark plug RPM adaptor
  • Free Race Studio 3 download


RPM Spark Plug Adaptor 

 

The Aim spark RPM adaptor has been designed for installation on single cylinder 2 or 4-stroke engines. It is a filter that converts the RPM signal sampled by induction from the spark plug into a square wave signal. 

The image below shows the signal sampled by induction on the left and the square wave signal on the right.

 

To install the adaptor connect the plastic clip to the spark plug and the cables as follows:

The black cable labelled GND to the device GND pin.
The red cable is labelled 9-15 VDC to a +12V output (the battery positive pole for example).
The blue cable labelled RPM to Aim device RPM input.




Prepare to unlock your potential



Our mission is to help educate you and enable you to get the most out of your Aim data equipment… whether you are new to racing or a seasoned professional, there is always something new to learn.



     

    Aim Spark Plug Inductive RPM Adaptor


    The drawing below shows the adaptor correctly installed.


    Aim Spark Plug Inductive RPM Adaptor




    FAQ Centre

    Description

    Spark Plug Inductive RPM Adaptor


    The Aim RPM Adaptor has been designed for single cylinder 2 or 4-stroke engines.


    Key Features:






    • Spark plug RPM adaptor
    • Free Race Studio 3 download


    RPM Spark Plug Adaptor 

     

    The Aim spark RPM adaptor has been designed for installation on single cylinder 2 or 4-stroke engines. It is a filter that converts the RPM signal sampled by induction from the spark plug into a square wave signal. 

    The image below shows the signal sampled by induction on the left and the square wave signal on the right.

     

    To install the adaptor connect the plastic clip to the spark plug and the cables as follows:

    The black cable labelled GND to the device GND pin.
    The red cable is labelled 9-15 VDC to a +12V output (the battery positive pole for example).
    The blue cable labelled RPM to Aim device RPM input.




    Prepare to unlock your potential



    Our mission is to help educate you and enable you to get the most out of your Aim data equipment… whether you are new to racing or a seasoned professional, there is always something new to learn.





      Technical  

       

      Aim Spark Plug Inductive RPM Adaptor


      The drawing below shows the adaptor correctly installed.


      What's In The Box


      Aim Spark Plug Inductive RPM Adaptor

      Downloads




      FAQ Centre

      FAQ Centre