Passa alle informazioni sul prodotto
1 di 1

AiM Motorcycle Ecu Bridge With CAN/RS232 Communication Cable

SKU: SM-EB-CR

Prezzo regolare
£250.00
Prezzo regolare
Prezzo di vendita
£250.00

+ IVA (solo Regno Unito)

Spedizione a impatto zero con Shopify Planet
Spedizione a impatto zero per tutti gli ordini
Powered by Shopify Planet

Product code: X90BRIDGE00 Motorcycle.

The Aim Motorcycle ECU Bridge CAN RS232. Connection is available in two variants, the OBDII connector for immediate plug & play connection to the OBDII port of Motorcycles with stock ECU's or CAN/RS232 connection for direct installation on aftermarket ECU's. 

They are compatible with Aim MXL Dash, Aim G-Dash and of course with the Aim SmartyCam HD and Aim SmartyCam GP HD racing cameras.

The easiest way to show engine data on visors and SmartyCam videos

Aim ECU Bridge

ECU Bridge

ECU Bridge and RPM Bridge are two systems that are needed whenever engine data needs to be viewed  on a display or on a SmartyCam video (if no recording is require.

They are compatible with MXL Dash, G-Dash and of course with the SmartyCam and SmartyCamGP.

ECU Bridge is to be used in when the Engine Control Unit transmits data by either OBDII, CAN or RS232.

Aim have developed hundreds of different protocols to make compatibility with virtually all ECU's possible, either stock and after market ECU's. ECU Bridge has to be properly configured with Race Studio 2 software to communicate with the different visors/cameras on one side and ECU's on the other side.

ECU Bridge Connection Example

ECU Bridge Connection Example

RPM Bridge Connection Example

Aim RPM Bridge Connection Example

ECU with Aim Products

Aim RPM Bridge Connection Example

  

CAN/RS232 connection

ECU Bridge is available in two variants:
  • With OBDII connector, for immediate plug&play connection to the OBDII port of cars with stock ECU's
  • With CAN/RS232 connection, for direct installation on aftermarket ECU's.

Aim CAN - RS232 connection

 

RPM Bridge

RPM Bridge is to be used whenever the bike has got no ECU.
In this case RPM data can be obtained with connection to the coil or reading a square wave signal generated by the ignition system

Aim ECU Bridge CAN  K-LINE

 

Technical Specification

ECU Bridge technical characteristics

  • Configurable ECU interface
  • CAN protocol for external modules (visors or SmartyCam HD)
  • USB port for PC communication
  • External power 8/18 V


RPM Bridge technical characteristics

  • Coil signal 150-400 V
  • Square wave signal 4-50 V
  • CAN protocol for external modules (visors or SmartyCam HD)
  • USB port for PC communication
  • External power 8/18 V

ECU Bridge  ECU Bridge with connection cable (CAN/RS232 or CAN/K Line) USB cable  RPM Bridge  RPM Bridge with connection cable (loose wires) USB cable

ECU Bridge  ECU Bridge with connection cable (CAN/RS232 or CAN/K Line) USB cable  RPM Bridge  RPM Bridge with connection cable (loose wires) USB cable

ECU Bridge  ECU Bridge with connection cable (CAN/RS232 or CAN/K Line) USB cable  RPM Bridge  RPM Bridge with connection cable (loose wires) USB cable

In The Box


ECU Bridge

  • Aim Motorcycle ECU Bridge CAN RS232
  • USB cable



    ECU

    Stock and Racing ECU's

    You can find a list of ECU's on our support site here

     

     

    Downloads

     

    ECU Bridge user manual ver. 1.09 

     

    RPM Bridge user manual ver. 1.03 

     

    RPM Bridge pinout ver. 1.01 

     

    USB cable for data download for SMC Bridge 

     

    Gear calculation procedure ver. 1.09 

     

    Pictures