AiM Water (Coolant) M10 Temperature Sensor with 712-719 3 pin Patch Lead
SKU: S-T-M10-K-P
{{ product.metafields.descriptors.subtitle.value p5>
- 通常価格
- £115.00
- 通常価格
-
- セールスプライス
- £115.00
- 単価
- あたり
+ VAT (UK Only)
AiM Water (Coolant) M10 Temperature Sensor Kart
The AiM M10 water temperature sensor for MyChron can measure and sample water temperature providing accurate readings. This sensor comes with a 712-719 3 pin patch lead.
Key Features :
M10 water temperature sensor | 4 pin 719 male binder connection |
Suitable for all MyChrons | Rotax, X30, OK Engines |
712-719 3 pin patch lead |
AiM Water (Coolant) M10 Temperature Sensor Kart
The AiM PT100 M10 water (coolant) temperature kart sensor is for use with all MyChron kart dash/data loggers (including the new MyChron5 S and the older generation MyChron4). The sensor can measure and sample water temperature providing the most accurate readings.
The Thermo resistor should be in the cooling system/oil sump. It is recommended to install the sensor away from heat and electromagnetic interference sources like the RPM or Lap Receiver cables.
Temperature range of 0-150°C
Sensor cable length 250mm
Professional quality sensors for accurate readings
The M10 thread is most commonly found on Rotax, X30 and OK engines
4 pin 719 male binder connection
Comes with a 712-719 3 pin patch lead
Connections
The sensors are sold with a 25cm cable and optional patch leads are available. MyChron 5 will require a 712-719 3 pin patch lead.
The MyChron 5 S 2T, will require the MyChron 2T patch lead TC plug & black 719 TR plug. All patch leads can be found in the accessories tab.
AiM Water (Coolant) M10 Temperature Sensor Kart
- Temperature working range: 0/150°C
- Cable Sensor Length: 250mm
- M10 thread
- 4 pin male 719 Binder connection
- 712-719 3 pin male Binder connection 1.5m
AiM Water (Coolant) M10 Temperature Sensor Kart
- AiM Water Temperature Sensor M10 Thermocouple Resister
- 712-719 3 pin male Binder connection
Description
AiM Water (Coolant) M10 Temperature Sensor Kart
The AiM M10 water temperature sensor for MyChron can measure and sample water temperature providing accurate readings. This sensor comes with a 712-719 3 pin patch lead.Key Features :
M10 water temperature sensor | 4 pin 719 male binder connection |
Suitable for all MyChrons | Rotax, X30, OK Engines |
712-719 3 pin patch lead |
AiM Water (Coolant) M10 Temperature Sensor Kart
The AiM PT100 M10 water (coolant) temperature kart sensor is for use with all MyChron kart dash/data loggers (including the new MyChron5 S and the older generation MyChron4). The sensor can measure and sample water temperature providing the most accurate readings.The Thermo resistor should be in the cooling system/oil sump. It is recommended to install the sensor away from heat and electromagnetic interference sources like the RPM or Lap Receiver cables.
Temperature range of 0-150°C
Sensor cable length 250mm
Professional quality sensors for accurate readings
The M10 thread is most commonly found on Rotax, X30 and OK engines
4 pin 719 male binder connection
Comes with a 712-719 3 pin patch lead
Connections
The sensors are sold with a 25cm cable and optional patch leads are available. MyChron 5 will require a 712-719 3 pin patch lead.The MyChron 5 S 2T, will require the MyChron 2T patch lead TC plug & black 719 TR plug. All patch leads can be found in the accessories tab.
Technical
AiM Water (Coolant) M10 Temperature Sensor Kart
- Temperature working range: 0/150°C
- Cable Sensor Length: 250mm
- M10 thread
- 4 pin male 719 Binder connection
- 712-719 3 pin male Binder connection 1.5m
What's in The Box
AiM Water (Coolant) M10 Temperature Sensor Kart
- AiM Water Temperature Sensor M10 Thermocouple Resister
- 712-719 3 pin male Binder connection
Downloads
FAQ Centre
- 選択を選択すると、ページ全体が更新されます。