제품 정보로 건너뛰기
1 1

AiM ECU Bridge for Ferrari F430 Challenger GT3

SKU: SM-EB-FER

정가
£340.00
정가
세일 가격
£340.00

+ VAT(영국만 해당)

모든 배송은 탄소 중립적입니다.
Powered by Shopify Planet

AiM ECU Bridge for Ferrari F430 Challenger GT3


The Aim ECU Bridge for Ferrari F430 Challenger GT3 is the connector for immediate plug & play connection to the OBDII port of cars with stock ECUs or CAN/RS232 connection for direct installation on aftermarket ECUs. 

They are compatible with Aim MXL Dash, Aim G-Dash and Aim Formula steering wheels, and of course with the Aim SmartyCam HD and Aim SmartyCam GP HD racing cameras.

The easiest way to show engine data on visors and SmartyCam videos

Aim ECU Bridge

ECU Bridge

ECU Bridge and RPM Bridge are two systems that are needed whenever engine data needs to be viewed on a display or on a SmartyCam video (if no recording is required)

They are compatible with MXL Dash, G-Dash and Formula/GT steering wheels, and of course with the SmartyCam and SmartyCamGP.

ECU Bridge is to be used when the Engine Control Unit transmits data by either OBDII, CAN or RS232.

Aim has developed hundreds of different protocols to make compatibility with virtually all ECUs possible, either stock or aftermarket ecus. ECU Bridge has to be properly configured with Race Studio 2 software to communicate with the different visors/cameras on one side and ecus on the other side.

ECU Bridge Connection Example

ECU Bridge Connection Example

RPM Bridge Connection Example

Aim RPM Bridge Connection Example

ECU with Aim Products

Aim RPM Bridge Connection Example

  

CAN/RS232 connection

ECU Bridge is available in two variants:
  • With an OBDII connector, for immediate plug&play connection to the OBDII port of cars with stock ECU's
  • With CAN/RS232 connection, for direct installation on aftermarket ECU's.

Aim CAN - RS232 connection

 

RPM Bridge

RPM Bridge is to be used whenever the car has got no ECU (i.e. classic cars).
In this case, RPM data can be obtained with connection to the coil or by reading a square wave signal generated by the ignition system.

Aim ECU Bridge CAN  K-LINE

 

ECU Bridge technical characteristics


  • Configurable ECU interface
  • CAN protocol for external modules (visors or SmartyCam HD)
  • USB port for PC communication
  • External power 8/18 V


RPM Bridge technical characteristics


  • Coil signal 150-400 V
  • The square wave signal 4-50 V
  • CAN protocol for external modules (visors or SmartyCam HD)
  • USB port for PC communication
  • External power 8/18 V

    ECU Bridge  ECU Bridge with connection cable (CAN/RS232 or CAN/K Line) USB cable  RPM Bridge  RPM Bridge with connection cable (loose wires) USB cable

    ECU Bridge  ECU Bridge with connection cable (CAN/RS232 or CAN/K Line) USB cable  RPM Bridge  RPM Bridge with connection cable (loose wires) USB cable

    ECU Bridge  ECU Bridge with connection cable (CAN/RS232 or CAN/K Line) USB cable  RPM Bridge  RPM Bridge with connection cable (loose wires) USB cable


    ECU Bridge


    • ECU Bridge with connection cable (CAN/RS232 or CAN/K Line)
    • USB cable


      RPM Bridge


      • RPM Bridge with connection cable (loose wires)
      • USB cable

        Stock and Racing ECU's

        You can find a list of ECU's on our support site here

         

         

        FAQ Centre

        Description

        AiM ECU Bridge for Ferrari F430 Challenger GT3

        The Aim ECU Bridge for Ferrari F430 Challenger GT3 is the connector for immediate plug & play connection to the OBDII port of cars with stock ECUs or CAN/RS232 connection for direct installation on aftermarket ECUs. 


        They are compatible with Aim MXL Dash, Aim G-Dash and Aim Formula steering wheels, and of course with the Aim SmartyCam HD and Aim SmartyCam GP HD racing cameras.

        The easiest way to show engine data on visors and SmartyCam videos

        Aim ECU Bridge

        ECU Bridge

        ECU Bridge and RPM Bridge are two systems that are needed whenever engine data needs to be viewed on a display or on a SmartyCam video (if no recording is required)

        They are compatible with MXL Dash, G-Dash and Formula/GT steering wheels, and of course with the SmartyCam and SmartyCamGP.

        ECU Bridge is to be used when the Engine Control Unit transmits data by either OBDII, CAN or RS232.

        Aim has developed hundreds of different protocols to make compatibility with virtually all ECUs possible, either stock or aftermarket ecus. ECU Bridge has to be properly configured with Race Studio 2 software to communicate with the different visors/cameras on one side and ecus on the other side.

        ECU Bridge Connection Example

        ECU Bridge Connection Example

        RPM Bridge Connection Example

        Aim RPM Bridge Connection Example

        ECU with Aim Products

        Aim RPM Bridge Connection Example

          

        CAN/RS232 connection

        ECU Bridge is available in two variants:
        • With an OBDII connector, for immediate plug&play connection to the OBDII port of cars with stock ECU's
        • With CAN/RS232 connection, for direct installation on aftermarket ECU's.
        Aim CAN - RS232 connection

         

        RPM Bridge

        RPM Bridge is to be used whenever the car has got no ECU (i.e. classic cars).
        In this case, RPM data can be obtained with connection to the coil or by reading a square wave signal generated by the ignition system.

        Aim ECU Bridge CAN  K-LINE

         

        Technical Specification

        ECU Bridge technical characteristics


        • Configurable ECU interface
        • CAN protocol for external modules (visors or SmartyCam HD)
        • USB port for PC communication
        • External power 8/18 V


        RPM Bridge technical characteristics


        • Coil signal 150-400 V
        • The square wave signal 4-50 V
        • CAN protocol for external modules (visors or SmartyCam HD)
        • USB port for PC communication
        • External power 8/18 V

          ECU Bridge  ECU Bridge with connection cable (CAN/RS232 or CAN/K Line) USB cable  RPM Bridge  RPM Bridge with connection cable (loose wires) USB cable

          ECU Bridge  ECU Bridge with connection cable (CAN/RS232 or CAN/K Line) USB cable  RPM Bridge  RPM Bridge with connection cable (loose wires) USB cable

          ECU Bridge  ECU Bridge with connection cable (CAN/RS232 or CAN/K Line) USB cable  RPM Bridge  RPM Bridge with connection cable (loose wires) USB cable

          In The Box


          ECU Bridge


          • ECU Bridge with connection cable (CAN/RS232 or CAN/K Line)
          • USB cable


            RPM Bridge


            • RPM Bridge with connection cable (loose wires)
            • USB cable

              ECU

              Stock and Racing ECU's

              You can find a list of ECU's on our support site here

               

               

              Downloads

              FAQ Centre

              FAQ Centre