제품 정보로 건너뛰기
1 4

AiM EVO5 Motorcycle World SSP600 FIM Kit

SKU: EVO5-FIM-600

정가
£1,600.00
정가
세일 가격
£1,600.00

+ VAT(영국만 해당)

Shopify Planet을 통한 탄소 중립 배송
모든 주문에 대해 탄소 중립 배송
Powered by Shopify Planet

AiM EVO5 Motorcycle World SSP600 FIM Kit

The AiM EVO5 Motorcycle World SSP600 FIM kit has been specifically designed for World SSP600 bikes.

Key Features :

Two multi-channel connectors GPS Module included
ECU connection to over 1000+ ECUs CAN output

AiM EVO5 Data Logger

AiM has designed a specific connection for the World SSP600 bike ECU for the EVO5. The specially designed connection kit contains a six pin male Sumitomo connector, Sumitomo connector pins, Rubber wire seals and 2 dummy plugs, this kit will allow you to read data from the ECU via CAN, while at the same time powering the system.
EVO5 is the evolution of the traditional Data Logger, with its compact aluminium body, EVO5 can be easily placed in any vehicle. Its configuration with Race Studio 3 software is simple and immediate.
The incoming data from your ECU via CAN, the internal accelerometer and gyro, and the GPS Module are all recorded by the EVO5. The unit can also accept digital or analogue inputs. Sensors can be connected to 8 configurable analogue channels, to the RPM input and up to 4 wheel speed inputs.


Plug & Play

The compatible models for World SSP600:

Aim Cobra ECU For Honda Motocross Bikes
World SSP600 bikes (with MecTronic - MKE7 ECU) - 2019-2020

Two Digital Outputs

EVO5 features two digital outputs. The built-in digital outputs can be configured to automatically run external systems when an event happens. A good example would be the activation/deactivation of a cooling fan when a certain temperature is met.


CAN output

With the CAN Output, you can send messages directly to an existing CAN network to improve the range of vehicle control possibilities.


Two Multi-Channel Motorsport Connectors

Straightforward, the 37 pins connector harness supplied with the kit offers your main applications such as power, CAN, etc

A second 22 pin connector harness is available for functions like CAN2 and digital outputs. This harness is (Sold Separately) See Accessories Tab


Endless Expansion Possibilities

Add expansion modules via the built-in CAN Bus: Channel Expansion

It permits you to add 4 0.5 Volt analogue channels for pressure, Temperature Sensors and potentiometers. Two of these channels can be configured to receive digital inputs like wheel speed.

LCU-One CAN

Wideband Lambda controller LCU-One, with Bosch LSU 4.9 probe, providing all Air/Fuel data and lambda value, allows to perfectly tune the carburetion.

SmartyCam HD Cameras

The onboard cameras overlay on videos the data sampled by your logger.

Displays

To make sense of all the incoming data, the EVO5 can be connected to the GS Dash Display.

Memory Module

The Memory Module is a small SD Card holder that can be connected via CAN-Bus to your AiM logger to record the data during your tests.


Expand Your System

These are only some of the items that can be added to our EVO5 for incrementing the performance and the data acquired.


Configure & Analyse with Race Studio 3

Configuration

With Race Studio 3 you can create, modify, delete, import and export configurations with all channels, ECU drivers, Math channels, Display Pages, Digital outputs, Alarms, Shift Lights and all the expansions you need. You will also be able to manage the map of all your racing tracks and compare two laps by watching the video recorded by SmartyCam HD cameras.

Analysis

With Race Studio 3 you can also analyse all data recorded by EVO5 and downloaded to your PC: graphs, histograms and tables will help you study your performance, providing an objective support to avoid mistakes and improve performance.


Visit Aim Academy Visit Aim Tech Support Download Race Studio Software

AiM EVO5 Motorcycle World SSP600 FIM Kit

  • ECU Connection: CAN, RS232 or K-Line to 1000+ industry-leading ECUs
  • External Modules: GPS Module, Channel Expansion, TC Hub, Lambda Controller, SmartyCam HD
  • Analogue Inputs: 8 fully configurable - 0-5V, 0-12V, K thermocouples. Max freq 1 kHz each
  • Digital Inputs: Coil RPM and 4-speed inputs
  • Intertial Platform: Internal 3 axis ±5G accelerometer + 3 axis gyro
  • Digital Outputs: 2, up to 1 Amp each
  • Second CAN: Yes
  • WiFi Connection: Yes
  • Internal Memory: 4 GB
  • SD Card: Internal - up to 128 GB (Sold Separately)
  • Connectors: 2 Motorsport connectors
  • Body: Anodized Aluminium
  • Dimensions: 114.4 x 47.2 x 58.8mm
  • Weight: 300g
  • Waterproof: IP65
  • Connection Kit Contains:
  • x 1 6 pins male Sumitomo connector
  • x 4 Sumitomo connector male pins
  • x 4 rubber wire seals
  • x 2 dummy plugs

     

    Sumitomo connector pin


    AiM EVO5 Motorcycle World SSP600 FIM Kit

    • EVO5 Data Logger
    • 37 pins Harness
    • Connector Kit:
    • x 1 6 pins male Sumitomo connector
    • x 4 Sumitomo connector male pins
    • x 4 rubber wire seals
    • x 2 dummy plugs
    • GPS Module
    • AiM Sticker
      FAQ Centre

      Description

      AiM EVO5 Motorcycle World SSP600 FIM Kit

      The AiM EVO5 Motorcycle World SSP600 FIM kit has been specifically designed for World SSP600 bikes.

      Key Features :

      Two multi-channel connectors GPS Module included
      ECU connection to over 1000+ ECUs CAN output


      AiM EVO5 Data Logger

      AiM has designed a specific connection for the World SSP600 bike ECU for the EVO5. The specially designed connection kit contains a six pin male Sumitomo connector, Sumitomo connector pins, Rubber wire seals and 2 dummy plugs, this kit will allow you to read data from the ECU via CAN, while at the same time powering the system.
      EVO5 is the evolution of the traditional Data Logger, with its compact aluminium body, EVO5 can be easily placed in any vehicle. Its configuration with Race Studio 3 software is simple and immediate.
      The incoming data from your ECU via CAN, the internal accelerometer and gyro, and the GPS Module are all recorded by the EVO5. The unit can also accept digital or analogue inputs. Sensors can be connected to 8 configurable analogue channels, to the RPM input and up to 4 wheel speed inputs.


      Plug & Play

      The compatible models for World SSP600:

      Aim Cobra ECU For Honda Motocross Bikes
      World SSP600 bikes (with MecTronic - MKE7 ECU) - 2019-2020

      Two Digital Outputs

      EVO5 features two digital outputs. The built-in digital outputs can be configured to automatically run external systems when an event happens. A good example would be the activation/deactivation of a cooling fan when a certain temperature is met.


      CAN output

      With the CAN Output, you can send messages directly to an existing CAN network to improve the range of vehicle control possibilities.


      Two Multi-Channel Motorsport Connectors

      Straightforward, the 37 pins connector harness supplied with the kit offers your main applications such as power, CAN, etc

      A second 22 pin connector harness is available for functions like CAN2 and digital outputs. This harness is (Sold Separately) See Accessories Tab


      Endless Expansion Possibilities

      Add expansion modules via the built-in CAN Bus: Channel Expansion

      It permits you to add 4 0.5 Volt analogue channels for pressure, Temperature Sensors and potentiometers. Two of these channels can be configured to receive digital inputs like wheel speed.

      LCU-One CAN

      Wideband Lambda controller LCU-One, with Bosch LSU 4.9 probe, providing all Air/Fuel data and lambda value, allows to perfectly tune the carburetion.

      SmartyCam HD Cameras

      The onboard cameras overlay on videos the data sampled by your logger.

      Displays

      To make sense of all the incoming data, the EVO5 can be connected to the GS Dash Display.

      Memory Module

      The Memory Module is a small SD Card holder that can be connected via CAN-Bus to your AiM logger to record the data during your tests.




      Expand Your System

      These are only some of the items that can be added to our EVO5 for incrementing the performance and the data acquired.




      Configure & Analyse with Race Studio 3

      Configuration

      With Race Studio 3 you can create, modify, delete, import and export configurations with all channels, ECU drivers, Math channels, Display Pages, Digital outputs, Alarms, Shift Lights and all the expansions you need. You will also be able to manage the map of all your racing tracks and compare two laps by watching the video recorded by SmartyCam HD cameras.

      Analysis

      With Race Studio 3 you can also analyse all data recorded by EVO5 and downloaded to your PC: graphs, histograms and tables will help you study your performance, providing an objective support to avoid mistakes and improve performance.


      Visit Aim Academy Visit Aim Tech Support Download Race Studio Software

      Technical 

      AiM EVO5 Motorcycle World SSP600 FIM Kit

      • ECU Connection: CAN, RS232 or K-Line to 1000+ industry-leading ECUs
      • External Modules: GPS Module, Channel Expansion, TC Hub, Lambda Controller, SmartyCam HD
      • Analogue Inputs: 8 fully configurable - 0-5V, 0-12V, K thermocouples. Max freq 1 kHz each
      • Digital Inputs: Coil RPM and 4-speed inputs
      • Intertial Platform: Internal 3 axis ±5G accelerometer + 3 axis gyro
      • Digital Outputs: 2, up to 1 Amp each
      • Second CAN: Yes
      • WiFi Connection: Yes
      • Internal Memory: 4 GB
      • SD Card: Internal - up to 128 GB (Sold Separately)
      • Connectors: 2 Motorsport connectors
      • Body: Anodized Aluminium
      • Dimensions: 114.4 x 47.2 x 58.8mm
      • Weight: 300g
      • Waterproof: IP65
      • Connection Kit Contains:
      • x 1 6 pins male Sumitomo connector
      • x 4 Sumitomo connector male pins
      • x 4 rubber wire seals
      • x 2 dummy plugs

         

        Sumitomo connector pin


        What's in The Box

        AiM EVO5 Motorcycle World SSP600 FIM Kit

        • EVO5 Data Logger
        • 37 pins Harness
        • Connector Kit:
        • x 1 6 pins male Sumitomo connector
        • x 4 Sumitomo connector male pins
        • x 4 rubber wire seals
        • x 2 dummy plugs
        • GPS Module
        • AiM Sticker

          Downloads

          FAQ Centre

          FAQ Centre