제품 정보로 건너뛰기
1 2

KTM Plug & Play AiM Taipan Motocross ECU Kit

SKU: C-ECU-KTM

정가
£635.00
정가
세일 가격
£635.00

Shopify Planet을 통한 탄소 중립 배송
모든 주문에 대해 탄소 중립 배송

AiM Taipan ECU Plug & Play Kit For KTM Motocross Bikes

Taipan is the brand-new aftermarket plug & play ECU created by AiM, exclusively designed for off-road bikes. Thanks to its high technology 32-bit core, it represents an important step forward to improve the performance of your bike, without sacrificing reliability and smoothness.

It provides the ultimate control in feeling, ignition, ignition phase, start maps, launch control, traction control with altitude and engine temperature corrections.

Taipan Key Features & Advanced Strategies

Injection main alpha-n Injection main speed-density
Injection crank correction Pre-injection
Injection BAP Correction Injection EWT Correction
Injection IAT Correction Injector Battery Correction
Injector 2 Ignition BAP Correction
Ignition EWT Correction Ignition IAT Correction
Ignition Opening Transient Correction Ignition Closing Transient Correction
Launch Control Injection Launch Control Main Table
Ignition Launch Control Main Table Quick Shift
Traction Control



Traction Control Strategy

For each map, the ECU has a dedicated traction control main table.


Launch Control

For each map, the ECU has a dedicated launch control main table.


High Technology 32-bit Core

Engine control requires precision. At 20,000 RPM the Taipan ECU guarantees a precision of 1/10 of degree: this means an accuracy within 0.8 sec for turning the spark ON!

This precision is the key to guarantee :

A very consistent engine rotation.

The possibility to repeat dozens of tests at the bench, always obtaining the same exact result.

A perfect reactivity at every minimum change of any point of a map, resulting in more power at the wheel.




UC Bridge

The UC Bridge is the connection between the CAN bus of the ECCU and the USB port of your PC. It is available in 2 different licenses :

User License : A Taipan ECU comes with some basic maps that already give you better performance than the stock maps. Highly professional tuners all over the world offer specific maps that better fit your requirements, managing, for example, different exhaust, two injectors etc.

The UC Bridge is required for two functions :
- Transfer new and different maps to your ECU through the User License UC Bridge.
- Receiving diagnostic information from the Taipan ECU.


Tuner License :

With this license, the tuner can create different maps, configurations and strategies designed for the rider's bike. The tuner can then flash them directly onto the ECU or send them via email to allow the rider to download and install them in the ECU.

*Please Note: For information regarding the UC-Bridge Tuner, Please contact one of our AiM technical team for further information.


Taipan ECU Connections

The Taipan ECU has 4 connectors :

Main Connector - Compatible with most off-road bikes.
CAN Connector - Connects to the Handlebar Switch and Data Logger.
2nd CAN Connector - Connect to the UC Bridge, in order to communicate with the PC.
3rd Connector - Connect to spare analogue inputs and to a possible second injector.


Aim Handlebar Switch

The Aim Handlebar Switch is the best way for changing the behaviour of your bike; it features 2 pushbuttons, 10 LEDs and manages the following settings :


Up to 5 selectable maps Apply fuel corrections
Activate traction control Activate launch control


The handlebar switch can also be used as a shift light module.



Below shows a functional diagram of products that can be added to the Taipan ECU:


Visit Aim Academy Visit Aim Tech Support Download Race Studio Software

AiM Taipan ECU Plug & Play Kit for KTM

  • Two 0-5V analogue inputs sampled @ 1,000 Hz each, could be alternatively used as a switch to ground
  • Second injector driver for high impedance saturated injectors (12Ω)
  • One low side driver (1 A)
  • Two CAN Bus, one for calibration purposes, one for expansions - (AiM handlebar switch, dataloggers, dash etc
  • Three JST JWPF waterproof auxiliary connector
  • Power consumption 150 mA
  • Connectors: n. 1 JST 04T-JWPF-VSLE-S Connector
  • n. 1 JST 08R-JWPF-VSLE-D Connector
  • n. 1 JST 04R-JWPF-VSLE-S Connector
  • n. 1 33 pin male Connector
  • Body: PA6 + 30% glass fiber
  • Dimensions: 89.4 x 75.4 x 29.3mm
  • Waterproof: IP67
  • Weight: 260g



AiM Taipan ECU Plug & Play Kit for KTM

  • Plug & Play ECU for KTM

FAQ Centre

Description

AiM Taipan ECU Plug & Play Kit For KTM Motocross Bikes

Taipan is the brand-new aftermarket plug & play ECU created by AiM, exclusively designed for off-road bikes. Thanks to its high technology 32-bit core, it represents an important step forward to improve the performance of your bike, without sacrificing reliability and smoothness.

It provides the ultimate control in feeling, ignition, ignition phase, start maps, launch control, traction control with altitude and engine temperature corrections.

Taipan Key Features & Advanced Strategies

Injection main alpha-n Injection main speed-density
Injection crank correction Pre-injection
Injection BAP Correction Injection EWT Correction
Injection IAT Correction Injector Battery Correction
Injector 2 Ignition BAP Correction
Ignition EWT Correction Ignition IAT Correction
Ignition Opening Transient Correction Ignition Closing Transient Correction
Launch Control Injection Launch Control Main Table
Ignition Launch Control Main Table Quick Shift
Traction Control




Traction Control Strategy

For each map, the ECU has a dedicated traction control main table.




Launch Control

For each map, the ECU has a dedicated launch control main table.


High Technology 32-bit Core



Engine control requires precision. At 20,000 RPM the Taipan ECU guarantees a precision of 1/10 of degree: this means an accuracy within 0.8 sec for turning the spark ON!

This precision is the key to guarantee :

A very consistent engine rotation.

The possibility to repeat dozens of tests at the bench, always obtaining the same exact result.

A perfect reactivity at every minimum change of any point of a map, resulting in more power at the wheel.




UC Bridge



The UC Bridge is the connection between the CAN bus of the ECCU and the USB port of your PC. It is available in 2 different licenses :

User License : A Taipan ECU comes with some basic maps that already give you better performance than the stock maps. Highly professional tuners all over the world offer specific maps that better fit your requirements, managing, for example, different exhaust, two injectors etc.

The UC Bridge is required for two functions :
- Transfer new and different maps to your ECU through the User License UC Bridge.
- Receiving diagnostic information from the Taipan ECU.




Tuner License :

With this license, the tuner can create different maps, configurations and strategies designed for the rider's bike. The tuner can then flash them directly onto the ECU or send them via email to allow the rider to download and install them in the ECU.

*Please Note: For information regarding the UC-Bridge Tuner, Please contact one of our AiM technical team for further information.


Taipan ECU Connections



The Taipan ECU has 4 connectors :

Main Connector - Compatible with most off-road bikes.
CAN Connector - Connects to the Handlebar Switch and Data Logger.
2nd CAN Connector - Connect to the UC Bridge, in order to communicate with the PC.
3rd Connector - Connect to spare analogue inputs and to a possible second injector.


Aim Handlebar Switch



The Aim Handlebar Switch is the best way for changing the behaviour of your bike; it features 2 pushbuttons, 10 LEDs and manages the following settings :




Up to 5 selectable maps Apply fuel corrections
Activate traction control Activate launch control



The handlebar switch can also be used as a shift light module.





Below shows a functional diagram of products that can be added to the Taipan ECU:





Visit Aim Academy Visit Aim Tech Support Download Race Studio Software

Technical

AiM Taipan ECU Plug & Play Kit for KTM

  • Two 0-5V analogue inputs sampled @ 1,000 Hz each, could be alternatively used as a switch to ground
  • Second injector driver for high impedance saturated injectors (12Ω)
  • One low side driver (1 A)
  • Two CAN Bus, one for calibration purposes, one for expansions - (AiM handlebar switch, dataloggers, dash etc
  • Three JST JWPF waterproof auxiliary connector
  • Power consumption 150 mA
  • Connectors: n. 1 JST 04T-JWPF-VSLE-S Connector
  • n. 1 JST 08R-JWPF-VSLE-D Connector
  • n. 1 JST 04R-JWPF-VSLE-S Connector
  • n. 1 33 pin male Connector
  • Body: PA6 + 30% glass fiber
  • Dimensions: 89.4 x 75.4 x 29.3mm
  • Waterproof: IP67
  • Weight: 260g



What's in The Box

AiM Taipan ECU Plug & Play Kit for KTM

  • Plug & Play ECU for KTM

Video

Downloads

FAQ Centre

FAQ Centre