Honda CBR 600RR, CBR 1000RR AiM Solo 2 DL Motorcycle Cable & Bracket
SKU: HON-PP-HON-B
- 정가
- £85.00
- 정가
-
- 세일 가격
- £85.00
- 단가
- 당
+ VAT(영국만 해당)
Honda 600CBR, 1000CBR AiM Solo 2 DL Motorcycle Cable & Bracket
The AiM Honda motorcycle cable & bracket set has been specifically designed to provide a simple and secure mounting solution for the AiM Solo 2 DL GPS Lap Timers.
Key Features :
Honda cable & bracket | 7 pin - 712 male binder connection |
Bracket suitable for Solo 2 & Solo 2 DL | |
Honda Solo 2 DL Cable & Bracket
The AiM ECU plug & play cable has been specifically designed for the Honda bike allowing easy installation to your Solo 2 DL via the 7 pin - 712 male connection cable. The ECU cable is an easy fitment to your bike and allows ECU data to be logged.
The AiM Honda bracket has been designed to provide a simple and secure way for mounting your Solo 2 DL GPS Lap Timer onto your bike.
Our brackets are supplied with all the necessary hardware required for fitting to your bike.
Please Note: The bracket is only compatible with CBR 600RR original triple clamp.
Also, If you are unsure this bracket will fit your bike, don't hesitate to contact one of our team. Either by email, phone or online chat.
Plug & Play
The plug & play cable currently fits the following Honda bike models:
CBR 600RR - 2003-2019 | CBR 600RR HRC with D11 marked ECU - 2013-2015 |
CBR 1000RR - 2004-2016 | CBR 1000RR HRC - 2014-2016 |
Example data protocols
Example data protocols sampled include RPM, Active gear, Vehicle speed, Front wheel speed, Rear wheel speed warning led, Engine coolant temperature, Brake pressure, Throttle position, Speed, ABS intervention, ALC intervention, Low fuel level, Traction control, Oil pressure, Map menu and many more. Refer to the technical sheet in the Downloads Tab for an extensive protocol list.
Please Note: For these models/years Aim recommends not to remove the stock dash. Doing so will disable some of the bike functions or safety controls.
Expand Your System
These are some of the items that can be added to your bike for incrementing performance and data.
Honda 600CBR, 1000CBR AiM Solo 2 DL Motorcycle Cable & Bracket
- Specifically designed Honda Plug & play cable and bracket for the Solo 2 DL
- Below is the pinout drawing for the Honda plug & play connection cable.
Honda 600CBR, 1000CBR AiM Solo 2 DL Motorcycle Cable & Bracket
- Honda plug & play connection cable
- 1 bracket
- 2 Allen screws with flat head M4 x 10mm
- 1 washer
- 1 Allen screw with rounded head M6 x 60
- 1 rubber dowel
Description
Honda 600CBR, 1000CBR AiM Solo 2 DL Motorcycle Cable & Bracket
The AiM Honda motorcycle cable & bracket set has been specifically designed to provide a simple and secure mounting solution for the AiM Solo 2 DL GPS Lap Timers.Key Features :
Honda cable & bracket | 7 pin - 712 male binder connection |
Bracket suitable for Solo 2 & Solo 2 DL | |
Honda Solo 2 DL Cable & Bracket
The AiM ECU plug & play cable has been specifically designed for the Honda bike allowing easy installation to your Solo 2 DL via the 7 pin - 712 male connection cable. The ECU cable is an easy fitment to your bike and allows ECU data to be logged.The AiM Honda bracket has been designed to provide a simple and secure way for mounting your Solo 2 DL GPS Lap Timer onto your bike.
Our brackets are supplied with all the necessary hardware required for fitting to your bike.
Please Note: The bracket is only compatible with CBR 600RR original triple clamp.
Also, If you are unsure this bracket will fit your bike, don't hesitate to contact one of our team. Either by email, phone or online chat.
Plug & Play
The plug & play cable currently fits the following Honda bike models:CBR 600RR - 2003-2019 | CBR 600RR HRC with D11 marked ECU - 2013-2015 |
CBR 1000RR - 2004-2016 | CBR 1000RR HRC - 2014-2016 |
Example data protocols
Example data protocols sampled include RPM, Active gear, Vehicle speed, Front wheel speed, Rear wheel speed warning led, Engine coolant temperature, Brake pressure, Throttle position, Speed, ABS intervention, ALC intervention, Low fuel level, Traction control, Oil pressure, Map menu and many more. Refer to the technical sheet in the Downloads Tab for an extensive protocol list.Please Note: For these models/years Aim recommends not to remove the stock dash. Doing so will disable some of the bike functions or safety controls.
Expand Your System
These are some of the items that can be added to your bike for incrementing performance and data.Technical
Honda 600CBR, 1000CBR AiM Solo 2 DL Motorcycle Cable & Bracket
- Specifically designed Honda Plug & play cable and bracket for the Solo 2 DL
- Below is the pinout drawing for the Honda plug & play connection cable.
What's in The Box
Honda 600CBR, 1000CBR AiM Solo 2 DL Motorcycle Cable & Bracket
- Honda plug & play connection cable
- 1 bracket
- 2 Allen screws with flat head M4 x 10mm
- 1 washer
- 1 Allen screw with rounded head M6 x 60
- 1 rubber dowel
Downloads
FAQ Centre
- 선택 항목을 선택하면 전체 페이지가 새로 고쳐집니다.