Hopp til produktinformasjon
1 av 2

AiM Taipan Solo 2 DL Extension Cable

SKU: C-SOLO-P

Vanlig pris
£45.00
Vanlig pris
Salgs pris
£45.00

+ MVA (kun Storbritannia)

Klimanøytral frakt med Shopify Planet
Klimanøytral frakt på alle bestillinger
Drevet av Shopify Planet

AiM Taipan Solo 2 DL Extension Cable

The AiM Taipan Solo 2 DL extension cable has been specifically designed to connect the Taipan ECU and the Solo 2 DL.

Key Features :

Solo 2 DL extension cable 50cm length cable


AiM Taipan Accessories

The AiM CAN Solo 2 DL extension cable has been manufactured to connect the Solo 2 DL to the AiM Taipan ECU.

The patch lead has a 7 pin male binder connector that connects to the Solo 2 DL and the JST connector connects to the Taipan ECU and is available in a 50cm long cable.

Below shows a functional diagram of products that can be added to the Taipan ECU:



 


UC Bridge - Optional Extra

 

The UC Bridge is the connection between the CAN bus of the ECCU and the USB port of your PC. It is available in 2 different licenses :

User License:

A Taipan ECU comes with some basic maps that already give you better performance than the stock maps. Highly professional tuners all over the world offer specific maps that better fit your requirements, managing, for example, different exhaust, two injectors etc.

The UC Bridge is required for two functions:
- Transfer new and different maps to your ECU through the User License UC Bridge.
- Receiving diagnostic information from the Taipan ECU.

Tuner License:

With this license, the tuner can create different maps, configurations and strategies designed for the rider's bike. The tuner can then flash them directly onto the ECU or send them via email to allow the rider to download and install them in the ECU.

*Please Note: For information regarding the UC-Bridge Tuner, Please contact one of our Aim technical team for further information.


Taipan ECU Connections - Optional Extra

The Taipan ECU has 4 connectors :

Main Connector - Compatible with most off-road bikes.
CAN Connector - Connects to the Handlebar Switch and Data Logger.
2nd CAN Connector - Connect to the UC Bridge, in order to communicate with the PC.
3rd Connector - Connect to spare analogue inputs and to a possible second injector.


Aim Handlebar Switch - Optional Extra

The Aim Handlebar Switch is the best way for changing the behaviour of your bike; it features 2 pushbuttons, 10 LEDs and manages the following settings :


Up to 5 selectable maps Apply fuel corrections
Activate traction control Activate launch control

The handlebar switch can also be used as a shift light module.


Visit Aim Academy Visit Aim Tech Support Download Race Studio Software

AiM Taipan Solo 2 DL Extension Cable

  • Solo 2 DL Extension Cable
  • Length: 50cm
  • 712 male binder connector - Cable 150mm
  • 4P Male JST Connector
  • 04T-JWPF-VSLE-S
  • PIN SWPT-001T-P025 - Cable 350mm
  • 4P Female JST connector
  • 04R-JWPF-VSLE-S
  • PIN-SWPR-001T-P025
  • Black - GND
  • White - CAN EXP H
  • Blue - CAN EXP L
  • Red - 12V



AiM Taipan Solo 2 DL Extension Cable

  • AiM Solo 2 DL Extension Cable 50cm
FAQ Centre

Description

AiM Taipan Solo 2 DL Extension Cable

The AiM Taipan Solo 2 DL extension cable has been specifically designed to connect the Taipan ECU and the Solo 2 DL.

Key Features :

Solo 2 DL extension cable 50cm length cable



AiM Taipan Accessories

The AiM CAN Solo 2 DL extension cable has been manufactured to connect the Solo 2 DL to the AiM Taipan ECU.

The patch lead has a 7 pin male binder connector that connects to the Solo 2 DL and the JST connector connects to the Taipan ECU and is available in a 50cm long cable.

Below shows a functional diagram of products that can be added to the Taipan ECU:





 


UC Bridge - Optional Extra

 



The UC Bridge is the connection between the CAN bus of the ECCU and the USB port of your PC. It is available in 2 different licenses :

User License:

A Taipan ECU comes with some basic maps that already give you better performance than the stock maps. Highly professional tuners all over the world offer specific maps that better fit your requirements, managing, for example, different exhaust, two injectors etc.

The UC Bridge is required for two functions:
- Transfer new and different maps to your ECU through the User License UC Bridge.
- Receiving diagnostic information from the Taipan ECU.

Tuner License:

With this license, the tuner can create different maps, configurations and strategies designed for the rider's bike. The tuner can then flash them directly onto the ECU or send them via email to allow the rider to download and install them in the ECU.

*Please Note: For information regarding the UC-Bridge Tuner, Please contact one of our Aim technical team for further information.


Taipan ECU Connections - Optional Extra



The Taipan ECU has 4 connectors :

Main Connector - Compatible with most off-road bikes.
CAN Connector - Connects to the Handlebar Switch and Data Logger.
2nd CAN Connector - Connect to the UC Bridge, in order to communicate with the PC.
3rd Connector - Connect to spare analogue inputs and to a possible second injector.


Aim Handlebar Switch - Optional Extra



The Aim Handlebar Switch is the best way for changing the behaviour of your bike; it features 2 pushbuttons, 10 LEDs and manages the following settings :


Up to 5 selectable maps Apply fuel corrections
Activate traction control Activate launch control

The handlebar switch can also be used as a shift light module.


Visit Aim Academy Visit Aim Tech Support Download Race Studio Software

Technical 

AiM Taipan Solo 2 DL Extension Cable

  • Solo 2 DL Extension Cable
  • Length: 50cm
  • 712 male binder connector - Cable 150mm
  • 4P Male JST Connector
  • 04T-JWPF-VSLE-S
  • PIN SWPT-001T-P025 - Cable 350mm
  • 4P Female JST connector
  • 04R-JWPF-VSLE-S
  • PIN-SWPR-001T-P025
  • Black - GND
  • White - CAN EXP H
  • Blue - CAN EXP L
  • Red - 12V



What's in The Box

AiM Taipan Solo 2 DL Extension Cable

  • AiM Solo 2 DL Extension Cable 50cm

Video

Downloads

FAQ Centre

FAQ Centre