AiM Water (Coolant) M5 Temperature Sensor Kart
SKU: S-T-M5-K
- Vanlig pris
- £70.00
- Vanlig pris
-
- Salgs pris
- £70.00
- Enhetspris
- per
+ MVA (kun Storbritannia)
AiM Water (Coolant) M5 Temperature Sensor Kart
The AiM M5 water temperature sensor for MyChron can measure and sample water temperature providing accurate readings.
Key Features :
M5 water temperature sensor | 4 pin 719 male binder connection |
Suitable for all MyChrons | Rotax, X30, OK Engines |
AiM Water (Coolant) M5 Temperature Sensor Kart
The AiM PT100 M5 water (coolant) temperature kart sensor is for use with all MyChron kart dash/data loggers (including the new MyChron5 S and the older generation MyChron4). The sensor can measure and sample water temperature providing the most accurate readings.
The Thermo resistor should be in the cooling system/oil sump. It is recommended to install the sensor away from heat and electromagnetic interference sources like the RPM or Lap Receiver cables.
Temperature range of 0-150°C
Sensor cable length 250mm
Professional quality sensors for accurate readings
The M10 thread is most commonly found on Rotax, X30 and OK engines
4 pin 719 male binder connection
Connections
The sensors are sold with a 25cm cable and optional patch leads are available. MyChron 5 will require a 712-719 3 pin patch lead.
The MyChron 5 S 2T, will require the MyChron 2T patch lead TC plug & black 719 TR plug. All patch leads can be found in the accessories tab.
AiM Water (Coolant) M5 Temperature Sensor Kart
- Temperature working range: 0/150°C
- Cable Sensor Length: 250mm
- M5 thread
- 4 pin male 719 Binder connection
AiM Water (Coolant) M5 Temperature Sensor Kart
- AiM Water Temperature Sensor M5 Thermocouple Resister
Description
AiM Water (Coolant) M5 Temperature Sensor Kart
The AiM M5 water temperature sensor for MyChron can measure and sample water temperature providing accurate readings.Key Features :
M5 water temperature sensor | 4 pin 719 male binder connection |
Suitable for all MyChrons | Rotax, X30, OK Engines |
AiM Water (Coolant) M5 Temperature Sensor Kart
The AiM PT100 M5 water (coolant) temperature kart sensor is for use with all MyChron kart dash/data loggers (including the new MyChron5 S and the older generation MyChron4). The sensor can measure and sample water temperature providing the most accurate readings.The Thermo resistor should be in the cooling system/oil sump. It is recommended to install the sensor away from heat and electromagnetic interference sources like the RPM or Lap Receiver cables.
Temperature range of 0-150°C
Sensor cable length 250mm
Professional quality sensors for accurate readings
The M10 thread is most commonly found on Rotax, X30 and OK engines
4 pin 719 male binder connection
Connections
The sensors are sold with a 25cm cable and optional patch leads are available. MyChron 5 will require a 712-719 3 pin patch lead.The MyChron 5 S 2T, will require the MyChron 2T patch lead TC plug & black 719 TR plug. All patch leads can be found in the accessories tab.
Technical
AiM Water (Coolant) M5 Temperature Sensor Kart
- Temperature working range: 0/150°C
- Cable Sensor Length: 250mm
- M5 thread
- 4 pin male 719 Binder connection
What's in The Box
AiM Water (Coolant) M5 Temperature Sensor Kart
- AiM Water Temperature Sensor M5 Thermocouple Resister
Downloads
FAQ Centre
- Ved å gjøre et valg vil hele siden lastes inn på nytt.