Gå til produktinformasjon
1 av 2

AiM Hall Speed Pick Up Sensor 719 Plug Motocross

SKU: S-S-H719-MX

Vanlig pris
£70.00
Vanlig pris
Salgs pris
£70.00

+ MVA (kun Storbritannia)

Carbon-neutral shipping with Shopify Planet
Carbon-neutral shipping on all orders
Powered by Shopify Planet

AiM Hall Speed Pick Up Sensor

The AiM non-contact sensor needs a metallic trigger to pass in front of it. It comes with a magnet and locknuts.

Key Features :

Hall effect wheel speed sensor 719 plastic connector
2m cable M8 thread


AiM Hall Speed Pick Up Sensor

AiM 712 Hall Speed Pick Up Sensor (2m cable). The output varies when it meets a magnetic field. The three-wire sensor produces a digital signal.

The sensor consists of a thin piece of metal that passes a continuous current through it. When the sensor is placed in a magnetic field the electrons move to one side of the metal and protons move to the other side of the plate. You will then be able to get a voltage.

The Hall Effect Sensor is a non-contact device that needs a metallic trigger to pass in front of it. Again, a bracket will usually need to be fabricated to mount the sensor in a suitable position. Please ensure that the distance between the sensor and trigger is in a 0.5 – 2.0 mm (0.007-0.07 inches) range.

The sensor only produces around Severn volts. When the electrons move to one side a potential difference is produced between the two sides of metal.


Connections

719 Connection to suit MXL (Strada and Pista), MXG/MXS/MXP (inc Strada), MXL2. Use a 719-719 Patch Lead to extend to the required length.


Visit Aim Academy Visit Aim Tech Support Download Race Studio Software

AiM Hall Speed Pick Up Sensor

  • 719 plug Binder Connector
  • Power Supply: 10-30 VDC
  • Sensibility Distance: From 0.5 to 2,5mm
  • Sensor Thread: M8
  • Operating Temperature Range: -25 to 70°C
  • Waterproof: IP67


AiM Hall Speed Pick Up Sensor

  • 1 x Hall Effect Speed Sensor 719 Plastic connector 2m Cable
FAQ Centre

Description

AiM Hall Speed Pick Up Sensor

The AiM non-contact sensor needs a metallic trigger to pass in front of it. It comes with a magnet and locknuts.

Key Features :

Hall effect wheel speed sensor 719 plastic connector
2m cable M8 thread



AiM Hall Speed Pick Up Sensor

AiM 712 Hall Speed Pick Up Sensor (2m cable). The output varies when it meets a magnetic field. The three-wire sensor produces a digital signal.

The sensor consists of a thin piece of metal that passes a continuous current through it. When the sensor is placed in a magnetic field the electrons move to one side of the metal and protons move to the other side of the plate. You will then be able to get a voltage.

The Hall Effect Sensor is a non-contact device that needs a metallic trigger to pass in front of it. Again, a bracket will usually need to be fabricated to mount the sensor in a suitable position. Please ensure that the distance between the sensor and trigger is in a 0.5 – 2.0 mm (0.007-0.07 inches) range.

The sensor only produces around Severn volts. When the electrons move to one side a potential difference is produced between the two sides of metal.


Connections

719 Connection to suit MXL (Strada and Pista), MXG/MXS/MXP (inc Strada), MXL2. Use a 719-719 Patch Lead to extend to the required length.


Visit Aim Academy Visit Aim Tech Support Download Race Studio Software

Technical 

AiM Hall Speed Pick Up Sensor

  • 719 plug Binder Connector
  • Power Supply: 10-30 VDC
  • Sensibility Distance: From 0.5 to 2,5mm
  • Sensor Thread: M8
  • Operating Temperature Range: -25 to 70°C
  • Waterproof: IP67


What's in The Box

AiM Hall Speed Pick Up Sensor

  • 1 x Hall Effect Speed Sensor 719 Plastic connector 2m Cable

Downloads

FAQ Centre

FAQ Centre