Gå til produktinformasjon
1 av 3

AiM Cylinder Head Thermocouple 14mm K Type Motorcycle

SKU: S-T-CH-X05SOT14A4516MS

Vanlig pris
£70.00
Vanlig pris
Salgs pris
£70.00

+ MVA (kun Storbritannia)

Carbon-neutral shipping with Shopify Planet
Carbon-neutral shipping on all orders
Powered by Shopify Planet

AiM Cylinder Head Thermocouple 14mm K Type

The AiM cylinder head thermocouple sensor for motorcycle allows you to measure cylinder head temperature when the sensor is placed between the spark plug and cylinder head.

Key Features :

Measure cylinder head temperature  Thermocouple male fitting
Wide temperature range 2 pins

AiM Cylinder Head Thermocouple 14mm K Type

The AiM Cylinder Head 14mm thermocouple features a turn in its lower part for an easier installation/uninstallation; it has to fit between the spark plug and the cylinder head.
To keep the sensor in contact with the cylinder head, remove the washer from the plug when installing the thermocouple.

While running the thermocouple cable along with the chassis, keep it as far as possible from other lines (like RPM or lap receiver ones) to minimize cable interferences.

Please note: before screwing the spark plug cable back ensure that the sensor is firmly fixed to the cylinder head. While screwing it, minimize the thermocouple movements to avoid damage to the sensor.

Temperature range of 0-300°c
Sensor cable length 400mm
Professional quality sensors for accurate readings
Designed for the harsh Motorsport environment
2 Pin K-Type thermocouple male connector


Connections

To use the sensors with EVO4 and EVO4S data loggers, you will need a TC yellow 712 4 pin patch lead (metal binder plug) or to use them with an AIM TC Hub or directly to a MyChron4 or MyChron5 kart lap timer/dash logger, you will need a TC yellow 712 3 pin patch lead (metal binder plug).

MXS, MXG, MXP, MXL2 and EVO5 will require a TC - TC yellow patch lead. To connect the thermocouples to these Aim dash/loggers, you need to use the dedicated harness supplied with your device.


Visit Aim Academy Visit Aim Tech Support Download Race Studio Software

AiM Cylinder Head Thermocouple 14mm K Type

  • Temperature working range: 0-300°C
  • Cable sensor length: 400mm
  • Cable Type: Compensated
  • Two pins male thermocouple connection
  • K Type thermocouple

AiM Cylinder Head Thermocouple 14mm K Type

  • AiM Cylinder Head 14mm Thermocouple Temperature Sensor
FAQ Centre

Description

AiM Cylinder Head Thermocouple 14mm K Type

The AiM cylinder head thermocouple sensor for motorcycle allows you to measure cylinder head temperature when the sensor is placed between the spark plug and cylinder head.

Key Features :

Measure cylinder head temperature  Thermocouple male fitting
Wide temperature range 2 pins


AiM Cylinder Head Thermocouple 14mm K Type

The AiM Cylinder Head 14mm thermocouple features a turn in its lower part for an easier installation/uninstallation; it has to fit between the spark plug and the cylinder head.
To keep the sensor in contact with the cylinder head, remove the washer from the plug when installing the thermocouple.

While running the thermocouple cable along with the chassis, keep it as far as possible from other lines (like RPM or lap receiver ones) to minimize cable interferences.

Please note: before screwing the spark plug cable back ensure that the sensor is firmly fixed to the cylinder head. While screwing it, minimize the thermocouple movements to avoid damage to the sensor.

Temperature range of 0-300°c
Sensor cable length 400mm
Professional quality sensors for accurate readings
Designed for the harsh Motorsport environment
2 Pin K-Type thermocouple male connector



Connections

To use the sensors with EVO4 and EVO4S data loggers, you will need a TC yellow 712 4 pin patch lead (metal binder plug) or to use them with an AIM TC Hub or directly to a MyChron4 or MyChron5 kart lap timer/dash logger, you will need a TC yellow 712 3 pin patch lead (metal binder plug).

MXS, MXG, MXP, MXL2 and EVO5 will require a TC - TC yellow patch lead. To connect the thermocouples to these Aim dash/loggers, you need to use the dedicated harness supplied with your device.


Visit Aim Academy Visit Aim Tech Support Download Race Studio Software

Technical 

AiM Cylinder Head Thermocouple 14mm K Type

  • Temperature working range: 0-300°C
  • Cable sensor length: 400mm
  • Cable Type: Compensated
  • Two pins male thermocouple connection
  • K Type thermocouple

What's in The Box

AiM Cylinder Head Thermocouple 14mm K Type

  • AiM Cylinder Head 14mm Thermocouple Temperature Sensor

Downloads

FAQ Centre

FAQ Centre