Gå til produktinformasjon
1 av 2

Aprilia RSV4 AiM Solo 2 DL Motorcycle Cable & Bracket

SKU: APR-PP-APR-B

Vanlig pris
£120.00
Vanlig pris
Salgs pris
£120.00

+ MVA (kun Storbritannia)

Carbon-neutral shipping with Shopify Planet
Carbon-neutral shipping on all orders
Powered by Shopify Planet

Aprilia RSV4 AiM Solo 2 DL Motorcycle Cable & Bracket

The AiM Aprilia motorcycle cable & bracket set has been specifically designed to provide a simple and secure mounting solution for the AiM Solo 2 DL GPS Lap Timers.

Key Features :

Aprilia cable & bracket 7 pin - 712 male binder connection
Bracket suitable for Solo 2 & Solo 2 DL


Aprilia Solo 2 DL Cable & Bracket

The AiM ECU plug & play cable has been specifically designed for the Aprilia bike allowing easy installation to your Solo 2 DL via the 7 pin - 712 male connection cable. The ECU cable is an easy fitment to your bike and allows ECU data to be logged.

The AiM Aprilia bracket has been designed to provide a simple and secure way for mounting your Solo 2 DL GPS Lap Timer onto your bike.

Our brackets are supplied with all the necessary hardware required for fitting to your bike.

Please Note: The bracket is only compatible with RSV4 original triple clamp.

Also, If you are unsure this bracket will fit your bike, don't hesitate to contact one of our team. Either by email, phone or online chat.


Plug & Play

The plug & play cable currently fits the following Aprilia bike models:

Aim Aprilia Motorcycle
Aprilia RSV4 RR/RF - From 2017 Aprilia RSV4 1100 - From 2019
Aprilia Tuono V4 RR/Factory - From 2017



Example data protocols

Example data protocols sampled include RPM, Active gear, Vehicle speed, Front wheel speed, Rear wheel speed warning led, Engine coolant temperature, Brake pressure, Throttle position, Speed, ABS intervention, ALC intervention, Low fuel level, Traction control, Oil pressure, Map menu and many more. Refer to the technical sheet in the Downloads Tab for an extensive protocol list.

Please Note: For these models/years Aim recommends not to remove the stock dash. Doing so will disable some of the bike functions or safety controls.


Expand Your System

These are some of the items that can be added to your bike for incrementing performance and data.


Visit Aim Academy Visit Aim Tech Support Download Race Studio Software

Aprilia RSV4 AiM Solo 2 DL Motorcycle Cable & Bracket

  • Specifically designed Aprilia RSV4 Plug & play cable and bracket for the Solo 2 DL
  • Below is the pinout drawing for the Aprilia plug & play connection cable.






Aprilia RSV4 AiM Solo 2 DL Motorcycle Cable & Bracket

  • Aprilia plug & play connection cable
  • 1 bracket
  • 1 Allen screw with rounded head M8 x 45mm
  • 2 Allen screws with flat head M4 x 10mm
  • 1 toothed washer
  • 1 rubber dowel
FAQ Centre

Description

Aprilia RSV4 AiM Solo 2 DL Motorcycle Cable & Bracket

The AiM Aprilia motorcycle cable & bracket set has been specifically designed to provide a simple and secure mounting solution for the AiM Solo 2 DL GPS Lap Timers.

Key Features :

Aprilia cable & bracket 7 pin - 712 male binder connection
Bracket suitable for Solo 2 & Solo 2 DL



Aprilia Solo 2 DL Cable & Bracket

The AiM ECU plug & play cable has been specifically designed for the Aprilia bike allowing easy installation to your Solo 2 DL via the 7 pin - 712 male connection cable. The ECU cable is an easy fitment to your bike and allows ECU data to be logged.

The AiM Aprilia bracket has been designed to provide a simple and secure way for mounting your Solo 2 DL GPS Lap Timer onto your bike.

Our brackets are supplied with all the necessary hardware required for fitting to your bike.

Please Note: The bracket is only compatible with RSV4 original triple clamp.

Also, If you are unsure this bracket will fit your bike, don't hesitate to contact one of our team. Either by email, phone or online chat.


Plug & Play

The plug & play cable currently fits the following Aprilia bike models:

Aim Aprilia Motorcycle
Aprilia RSV4 RR/RF - From 2017 Aprilia RSV4 1100 - From 2019
Aprilia Tuono V4 RR/Factory - From 2017




Example data protocols

Example data protocols sampled include RPM, Active gear, Vehicle speed, Front wheel speed, Rear wheel speed warning led, Engine coolant temperature, Brake pressure, Throttle position, Speed, ABS intervention, ALC intervention, Low fuel level, Traction control, Oil pressure, Map menu and many more. Refer to the technical sheet in the Downloads Tab for an extensive protocol list.

Please Note: For these models/years Aim recommends not to remove the stock dash. Doing so will disable some of the bike functions or safety controls.


Expand Your System

These are some of the items that can be added to your bike for incrementing performance and data.


Visit Aim Academy Visit Aim Tech Support Download Race Studio Software

Technical

Aprilia RSV4 AiM Solo 2 DL Motorcycle Cable & Bracket

  • Specifically designed Aprilia RSV4 Plug & play cable and bracket for the Solo 2 DL
  • Below is the pinout drawing for the Aprilia plug & play connection cable.






What's in The Box

Aprilia RSV4 AiM Solo 2 DL Motorcycle Cable & Bracket

  • Aprilia plug & play connection cable
  • 1 bracket
  • 1 Allen screw with rounded head M8 x 45mm
  • 2 Allen screws with flat head M4 x 10mm
  • 1 toothed washer
  • 1 rubber dowel

Downloads

FAQ Centre

FAQ Centre