AiM Car Fuel Level Sender With Aim Plug 719 Cable

£189

AiM Car Fuel Level Sender With Aim Plug 719 Cable. The fuel level sender outputs a voltage in...

AiM Car Fuel Level Sender With Aim Plug 719 Cable.


The fuel level sender outputs a voltage in proportion to the fuel level in your tank.


Key Features:


  • Probe length - 240mm max
  • Supply Voltage - 10-32v DC
  • -20°C to 85°C
  • Sealing - IP67


AiM Car Fuel Level Sender With Aim Plug 719 Cable

The fuel level sender with (719 plug) records the fuel level, allowing you to determine how much fuel you need for a session or race.

 


The supplied fuel sender will be calibrated for its full length, however you may need to shorten the fuel sender for your fuel tank.

If shortening the length of the fuel sender is required, ensure the length is 10mm short of the full depth of the tank but cannot be cut shorter than 200mm from where the gasket sits.

 

Please See Technical sheet in Downloads for further information on this product.














Prepare to unlock your potential



Our mission is to help educate you and enable you to get the most out of your AiM data equipment… whether you are new to racing or a seasoned professional, there is always something new to learn.


AiM Product Video

Subscribe to our YouTube channel for Product information, Software training and so much more.

AiM Shop Youtube Channel Product Videos - AiM Technologies - AiM Academy

    AiM Car Fuel Level Sender With Aim Plug 719 Cable

    • Fuel Types: Typically Diesel, Biodiesel, Kerosene and Petrol (Water is not measurable)
    • Probe Length: Min 200mm max 540mm
    • Mounting: SAE5 Hole
    • Supply Voltage: 10-32v DC
    • Supply Current: 28mA @ 12v DC
    • Supply Protection: Over voltage 80v DC for 2 minutes, Reverse Polarity
    • Signal Output: 0-5v DC or 5-0v DC, 20mV steps, Max 10mA source
    • Connections: 500mm long with either flying leads or an AiM plug fitting
    • Accuracy: + 3% of depth @ 20°C
    • Enclosure: 30% Glass filled Nylon
    • Enclosure Bush: Polypropylene
    • Internal Electrode: Aluminium
    • Sensor Tube: 316 Stainless Steel
    • Internal Spacers: Polyropylene
    • End Plug: PTFE
    • Wetted Seals: Viton (FKM) & Nitrile
    • Gasket: Nitrile
    • Cable: Polyurethane
    • Sealing IP67 (Assuming suitably sealed cable breakout)
    • Operating Temperature: -20°C to 85°C
    • Shock: 50g, 6.3ms
    • Vibration: 9.7g BS EN 60068-2-64-1993

     

      

     

    • AiM Car Fuel Level Sender With Aim Plug 719 Cable