AiM Solo 2 DL Lap Timer + SmartyCam HD Rev.2.1 x 2 + Data Hub Track Day Kit ( JSCC )


+ VAT (UK Only)

Order before 3pm - For same day despatch *

GPS Lap Timer & Data Logger 

AiM Solo 2 DL the most precise and simple way to get lap times, with ECU data and overlay it all with your SmartyCam video as well. 

Key Features:

  • Improved GPS speed & accuracy
  • Direct ECU data logging
  • Predictive lap timing

Solo 2 DL & SmartyCam HD Rev 2.1 Track Day Kit

Solo 2 DL raises the bar for GPS lap timers. The unit is capable of being connected to the vehicles ECU in order to obtain various data from the sensors fitted to the car. A comprehensive range of compatible ECUs allows for an easy installation. In the unlikely event your particular ECU protocol is not supported an ECU Driver Builder is available as part of the powerful Race Studio 3 Software.

The GPS technology used in this unit has been updated and now receives the data from three satellite constellations, GPS, Glonass and Galileo, making for a significant improvement in data speed and positioning precision. This means that the start up time is reduced to a matter of seconds and lap times are accurate to a tolerance of two hundredths of a second.

Coil RPM Input

Solo 2 DL now also features a digital input allowing you to log RPM either from square wave signals (8-50V each signal) or a pulse signals (150-450v) ignition coli trigger-primary circuit.

Powering on requires only a few seconds and lap times are calculated with a max 2/100 sec of tolerance.

Solo 2 DL gives instant Speed, Timing, Splits live data and predictive lap times. 

The Solo 2 DL screen can be back lit in one of the seven available colours:


Predictive Lap Timer

The AiM Solo 2 DL has 10 configurable RGB LEDs and will give you a clear and fast indication of the comparison with your last lap. Predictive page: shows the predicted current lap time in the format you set.

+/- in relation to the Reference Lap Predicted Lap Time

You can custom build the layout of the display to show the information you choose on 4 reconfigurable pages your data shown in your way see an example below.

Solo 2 DL Data Recall Modes

Solo 2 DL can manage two types of data or races:

In each of these configurations Solo 2 DL gives the complete information during the test with the data ready to view on the Solo 2 DL or Race Studio Analysis software immediately after each race or test session.

Data Recall on Screen Data

At the end of your test you can quickly review all the key information on your display, RPM, Temps Times ECT.

SmartyCam HD Connection

The SmartyCam HD 2.1 has been designed for motorsports with the purpose of providing great videos that will include all your technical information that will help you improve your driving performance. Get overlays for all your data from GPS i.e ROM, engaged gear, acceleration, temperatures, pressures. All of this information will be overplayed on videos in each single point of the track. 

Data Hub

The Data Hub is a CAN connection multiplier that works as an interface between all of our AiM loggers. The Data Hub takes all your information to the logger with only one cable.

Wi-Fi Communication with the PC

With wifi connectivity you can transfer your data securely and quickly to your laptop or computer without cables.

Solo 2 DL New Track Creation and our Track Database


Making use of GPS technology, the Solo 2 DL is pre-loaded with a database of over 4,000 tracks from all over the world so that as soon as the unit is switched on, it identifies its position and loads the start line coordinates ready to begin recording lap times. If, however, the particular track that you are at is not recognised, the Solo 2 DL automatically enters auto-learning mode and begins to build the track layout based on your car position and records the lap times.

Prepare to unlock your potential

Solo 2 DL Lap Timer

  • Display: Graphical
  • Display Resolution: 238x99 pixels
  • Display Pages: Up to 8 freely configurable
  • Back Light: 7 configurable RGB colours
  • Shift Lights / alarm LEDs: 10 configurable RGB LEDs
  • Integrated Track Database: Yes
  • Internal Platform: Internal 3 axis + 5G accelerometer + 3 axis gyro + 3 axis magnetometer
  • Wi-Fi Connection: Yes
  • GPS: 10 Hz External power: 12V
  • Memory: 4 GB
  • Battery Type: Rechargeable Lithium
  • Pushbuttons: Metallic
  • Dimensions: 98.0 x 73.7 x 30.2mm
  • Weight: 240g, battery included
  • Waterproof: IP65
  • ECU Connection: CAN RS232, or K-Line to 1,000 + industry leading ECUs
  • Multiple Configuration Management: Yes



Solo 2 DL 360° Product View

  • Aim Solo 2 DL
  • Power Cable with AC adapter
  • Mounting Bracket with screws
  • User Manual
  • Aim Sticker

Choice of cables: 
  • CAN/K-Line/External power cable with OBDII connector
  • CAN/RS232 external power cable
  • RPM/External power cable (if your vehicle has no ECU)

SmartyCam HD 2.1 

  • 2X SmartyCam HD 2.1 
  • Battery Charger
  • 2X USB/AC power adapter
  • 2 CAN Hub
  • AiM sticker

FAQ Centre