Free Shipping Next Day Delivery +44 (0)1782 393843 Shop now, Pay Later

AiM Tyre Pressure Monitoring System


+ VAT (UK Only)

Order before 3pm - For same day despatch *

Tyre Pressure Monitoring System

 Whether you're an engineer looking to understand your race car's tyre behaviour, or an OEM looking for a TPMS to meet legislative requirements. We have the system for you.

Key Features:

  • Connection output for CAN
  • Lightweight Sensors 
  • TPMS Receiver
  • Wiring Harness
  • Records Data
  • Manage multiple wheel sets
  • Free Race Studio 3 Download

Tyre Pressure Monitoring System

 The new TPMS kit is compatible with competition and race car applications that utilise 1Mbps CAN.

This new kit has a new and improved receiver that utilises 1Mbit CAN which has become standard over the years for professional ECUs, data loggers and dashboards within the Motorsport and automotive sectors.

The TPMS kit comes with 4 lightweight sensors and 1 receiver and a wiring harness to connect the receiver to the car wiring.

You can purchase 4, 8 and 12 sensor TPMS kits which will be already pre-coded with unique serial numbers that identify the corner location on the car.


TPMS CAN Receiver

The receiver is pre-coded with the 4 sensors it will use.

Each sensor is labelled FR, FL, RR, RL for each of the wheels of the car.

Extra wheels can be clone coded that can then be used as sets of spares for pit changes.

The TPMS receiver is supplied with a wiring harness to connect the receiver to the car wiring.


TPMS Sensors

 The TPMS sensors are already pre-assigned FR, FL, RR, RL so all you need to do to is connect your sensors to the correct tyre and all the data will be recorded on the receiver and then overlay on to your dash logger.

You can add as many sensors as you like, you will need to clone a sensor using the handheld reader.

Please Note: Should you require to purchase extra sensors you will need to purchase the Handheld programming unit in order to be able to manually programme the sensors.

Add a TPMS Handset to clone your extra sensors

You can add a Handset to your kit.

The TPMS handset is used for direct reading of sensor parameters such as pressure, temperature and battery voltage.

It can also be used to program or modify the sensor parameters, team code and wheel location.

The hand set is a valuable tool for recognising any changes to new sensor positions when swapping wheels and updating the receiver accordingly.



TPMS Connections

 The Tyre Pressure Monitoring System can be used with all of our dash display loggers (except Solo2). You can add a 4x CAN connection multiplier and a GPS module or our SmartyCam cameras to your system. See diagram below:

Unlock your potential

Our mission is to help enable you to get the most out of your AiM data equipment… whether you are new to racing or a seasoned professional, there is always something new to learn.


Tyre Pressure Monitoring System


  • Lightweight: 20g
  • Pressure Resolution: 15.7Mbar
  • 2Hz update
  • Sensor pressure measurement range: 0-8000mbar
  • High frequency modulation mode: FSK
  • Sensor temperature measurement range: -40°C to 125°C
  • Sensor temperature resolution: 1°C
  • Sealing: IP67
  • Battery lifespan: >2.5 Million transmissions
  • RF frequency: 433.92MHz
  • High frequency emission power: <8dbm (50ohms)

 Receiver & Harness

  • 1 Mbit CAN Interface
  • Lightweight
  • 4 unique Sensor codes
  • Individual CAN ID's for corner positions
  • Automatic learning for sensor serial number
  • Cable length: 300mm
  • Connector: AMP Superseal 6 way socket
  • Mating connector: AMP Superseal 6 way plug

Pinout for receiver

  • PIN 1 RED - Supply 9-16V
  • PIN 2 WHITE - Screen
  • PIN 4 GREEN - CAN-
  • PIN 6 N/C



    Tyre Pressure Monitoring System

    • 4,8,12 Sensors depending on which chosen at checkout
    • 1 TPMS Receiver
    • 1 Wiring Harness