AiM Water / Oil Temp M10 Type K Thermocouple Bike

+ VAT (UK Only)

£65

AiM M10 K Type Thermocouple Sensor AiM Thermocouple sensor M10 Type K. Key Features: Water / Oil 2...

AiM M10 K Type Thermocouple Sensor


AiM Thermocouple sensor M10 Type K.


Key Features:


  • Water / Oil
  • 2 pin mignon male
  • Free race studio 3 download
  • M10 Type K


Monitor Temperature


Our AiM device can measure the water temperature , thermocouple placed in the cooling system.

All AiM thermocouples are K Type sensors.

 

The thermocouple has to be placed in the cooling system. Install the sensor far from heat and electromagnetic interference sources, like RPM cable or lap receiver cables.

Please Note: MXG / MXS / MXL (Strada and Pista) / MXL2 / EVO5 / MXm etc harnesses are fitted with 719 connections. To extend the length between your dash display / logger and the analogue sensor, please use the 719-719 extension lead which is available in various lengths from 0.5 - 3 metres. For most installations you will need one of these leads.

EVO4 / EVO4S logger / Channel Expansion are fitted with 712 connections and require a 712-719 extension lead to connect these sensors.












Prepare to unlock your potential



Our mission is to help educate you and enable you to get the most out of your AiM data equipment… whether you are new to racing or a seasoned professional, there is always something new to learn.



    AiM Water / Oil Temp M10 Type K Thermocouple Bike

    • Temperature working range: 0-150C (32-302F)
    • Cable Type: Compensated

    The drawing below shows the thermocouple dimensions, on top and the optional water fitting dimensions on the bottom in mm.

    The thermocouple has 2 pins Mignon connector. The image below shows the connector on the left and the connection table on the right.

     

    AiM Water / Oil Temp M10 Type K Thermocouple Bike