• Integrated 25Hz GPS

• Wide graphical display

• Multicolour backlight

• Completely configurable

• 1 temperature sensor input

The GPS frequency has improved from 10 to 25Hz and the precision accuracy has improved from about 5 feet to 2 (1.5 m to 45 cm in average).
Below are a couple of screenshots that may explain the improvement: in blue and yellow the comparison between the "old" MyChron5 and the new MyChron5S GPS precision. As you see the precision dramatically improves passing from 1.5 m to 0.5 m.

In the following picture below you will appreciate the improvement we have made, passing from 10 to 25 data per seconds. The yellow dots show the new GPS data.

1 Temperature Sensor Input

MyChron 5S features 1 temperature sensor input which can be used to measure one of the following sensors, water temperature, under spark plug cylinder head temperature (CHT) or exhaust gas temperature (EGT)

Fantastic readability

With 7 configurable display colours to choose from, enabling the driver to view clear, easy to read numerical read outs on track such as lap times and lap number, RPM in a configurable scale and 1 temperature value. Once back in the paddock you can scroll through all relevant data on the display: lap times, with best lap indication, max RPM and max temperature value.

Choose optimal layout for your data

Lap and split times, best lap, RPM, gear number, track map and much more are shown in pre-configured pages: you will be able to choose the page layout you prefer to better monitor your data.

At the end of your session, you can recall the summary of your three best laps: lap time, max/min RPM, speed and temperature. For your best lap, you will also see splits and best theoretical time.

Shift Light & Alarm LEDs

 Five RGB shift lights can be configured for each gear, choosing LED colour and RPM threshold values which will turn them on/off. They also allow RPM monitoring in a glance. Even alarms are managed in a very flexible way: you choose the situation that generates the alarm, the LED behaviour (blinking frequency and colour) when the alarm appears and the conditions for its switch-off.

Monitor water temperature or any other parameter with configurable alarm LEDs

You can configure alarm LEDs as well, in order to turn them on/off depending on the values you selected: water temperature or any other parameter you may need.

 

Wireless data download with Wi-Fi connection

Download your data to your PC, look at the OnLine measures, upgrade your firmware, transmit parameters using the well-known Data Key or through fast WiFi connection.

External power or battery charge?
You choose.

MyChron5 S expansions and add-ons

Turn the device you have to the one you want

Learn more and trade up today >

Prepare to unlock your potential

AiM Mychron 5 S 360° Product View