AiM 22 Pin Deutsch Harness MXS, MXP, MXG, MXL2
SKU: H22-V02573020
- Vanligt pris
- £320.00
- Vanligt pris
-
- Försäljningspris
- £320.00
- Enhetspris
- per
AiM 22 Pin Deutsch Harness MXS, MXP, MXG, MXL2
The AiM 22 pin harness is an optional extra which is used to add extra channels and advanced functions to your kit.
Key Features :
Suitable for MXS, MXP, MXG, MXL2 | Optional harness |
Digital output | 22 pin harness |
22 pin Optional Harness for the MX Series
The AiM 90° 22 pin harness plugs into the 22-pin connector on the MXS, MXP, MXG or MXL2 dash loggers.
Several of the advanced functions rely on this harness, which is not included with the standard 37 pin harness which comes as standard with the dash loggers.
The 22 pins optional harness provides access to the following functions:
Analogue sensor channels 5, 6, 7, 8
Digital wheel speed sensor inputs 2, 3, 4
Digital 12V outputs 1, 2
RS232 ECU connection
Please Note: The standard harness that comes with the MXS, MXG, MXP, and MXL2 allows 4 inputs. If you would like more inputs for your race data then add this optional harness to your kit.
Adding analogue sensors greater than 4 - The standard harness will allow 4 analogue channels (sensors) - (1) Water Temperature, (2) Oil Temperature, (3) Oil Pressure, and (4) Brake Pressure.
Using the 22 pin harness you can add four more analogue channels (sensors) (5) Steering Angle, (6) Throttle Position, (7) Gear Box, and (8) Differential Temperature.
Expand Your System
These are some of the items that can be added to your car for incrementing performance and data.
AiM 22 Pin Deutsch Harness MXS, MXP, MXG, MXL2
- 22 pin Deutsch Female Flying Connector
- 4 pins Binder 719 Female connector - See table in Downloads Tab
- Table of none ended cables - See table in Downloads Tab
AiM 22 Pin Deutsch Harness MXS, MXP, MXG, MXL2
- 22 pin Harness for MXS, MXP, MXG, MXL2
Description
AiM 22 Pin Deutsch Harness MXS, MXP, MXG, MXL2
The AiM 22 pin harness is an optional extra which is used to add extra channels and advanced functions to your kit.Key Features :
Suitable for MXS, MXP, MXG, MXL2 | Optional harness |
Digital output | 22 pin harness |
22 pin Optional Harness for the MX Series
The AiM 90° 22 pin harness plugs into the 22-pin connector on the MXS, MXP, MXG or MXL2 dash loggers.Several of the advanced functions rely on this harness, which is not included with the standard 37 pin harness which comes as standard with the dash loggers.
The 22 pins optional harness provides access to the following functions:
Analogue sensor channels 5, 6, 7, 8
Digital wheel speed sensor inputs 2, 3, 4
Digital 12V outputs 1, 2
RS232 ECU connection
Please Note: The standard harness that comes with the MXS, MXG, MXP, and MXL2 allows 4 inputs. If you would like more inputs for your race data then add this optional harness to your kit.
Adding analogue sensors greater than 4 - The standard harness will allow 4 analogue channels (sensors) - (1) Water Temperature, (2) Oil Temperature, (3) Oil Pressure, and (4) Brake Pressure.
Using the 22 pin harness you can add four more analogue channels (sensors) (5) Steering Angle, (6) Throttle Position, (7) Gear Box, and (8) Differential Temperature.
Expand Your System
These are some of the items that can be added to your car for incrementing performance and data.Technical
AiM 22 Pin Deutsch Harness MXS, MXP, MXG, MXL2
- 22 pin Deutsch Female Flying Connector
- 4 pins Binder 719 Female connector - See table in Downloads Tab
- Table of none ended cables - See table in Downloads Tab
What's in The Box
AiM 22 Pin Deutsch Harness MXS, MXP, MXG, MXL2
- 22 pin Harness for MXS, MXP, MXG, MXL2
Downloads
FAQ Centre
- Att välja ett urval resulterar i en helsidasuppdatering.