Gå till produktinformation
1 av 1

AiM Taipan Second Injection Harness

SKU: C-H-IN

Vanligt pris
£30.00
Vanligt pris
Försäljningspris
£30.00

Koldioxidneutral leverans med Shopify Planet
Koldioxidneutral leverans för alla ordrar

AiM Taipan Second Injection Harness

The AiM Taipan second injection harness is connected to the 3rd connector on the Taipan ECU.

Key Features :

Second injection harness 2500cm length


AiM Taipan Accessories

The AiM Taipan second injection harness is connected to the 3rd connector on the JST connection Taipan ECU.

The patch lead is connected to the JST connector on the Taipan ECU and is available in 2500cm cable. With two flying leads - Red wire 12V second injection and a Black wire - second injection CMD.

Below shows a functional diagram of products that can be added to the Taipan ECU:



 


UC Bridge - Optional Extra

 

The UC Bridge is the connection between the CAN bus of the ECCU and the USB port of your PC. It is available in 2 different licenses :

User License:

A Taipan ECU comes with some basic maps that already give you better performance than the stock maps. Highly professional tuners all over the world offer specific maps that better fit your requirements, managing, for example, different exhaust, two injectors etc.

The UC Bridge is required for two functions:
- Transfer new and different maps to your ECU through the User License UC Bridge.
- Receiving diagnostic information from the Taipan ECU.

Tuner License:

With this license, the tuner can create different maps, configurations and strategies designed for the rider's bike. The tuner can then flash them directly onto the ECU or send them via email to allow the rider to download and install them in the ECU.

*Please Note: For information regarding the UC-Bridge Tuner, Please contact one of our Aim technical team for further information.


Taipan ECU Connections - Optional Extra

The Taipan ECU has 4 connectors:

Main Connector - Compatible with most off-road bikes.
CAN Connector - Connects to the Handlebar Switch and Data Logger.
2nd CAN Connector - Connect to the UC Bridge, in order to communicate with the PC.
3rd Connector - Connect to spare analogue inputs and to a possible second injector.


Aim Handlebar Switch - Optional Extra

The Aim Handlebar Switch is the best way for changing the behaviour of your bike; it features 2 pushbuttons, 10 LEDs and manages the following settings:


Up to 5 selectable maps Apply fuel corrections
Activate traction control Activate launch control

The handlebar switch can also be used as a shift light module.


Visit Aim Academy Visit Aim Tech Support Download Race Studio Software

AiM Taipan Second Injection Harness

  • JST Connector 08T-JWPF-VSLE-D
  • Red Wire - 12V Second INJ
  • Black Wire - Second INJ CMD
  • Full length - 2500cm



AiM Taipan Second Injection Harness

  • Second injection harness - 2500cm
FAQ Centre

Description

AiM Taipan Second Injection Harness

The AiM Taipan second injection harness is connected to the 3rd connector on the Taipan ECU.

Key Features :

Second injection harness 2500cm length



AiM Taipan Accessories

The AiM Taipan second injection harness is connected to the 3rd connector on the JST connection Taipan ECU.

The patch lead is connected to the JST connector on the Taipan ECU and is available in 2500cm cable. With two flying leads - Red wire 12V second injection and a Black wire - second injection CMD.

Below shows a functional diagram of products that can be added to the Taipan ECU:





 


UC Bridge - Optional Extra

 



The UC Bridge is the connection between the CAN bus of the ECCU and the USB port of your PC. It is available in 2 different licenses :

User License:

A Taipan ECU comes with some basic maps that already give you better performance than the stock maps. Highly professional tuners all over the world offer specific maps that better fit your requirements, managing, for example, different exhaust, two injectors etc.

The UC Bridge is required for two functions:
- Transfer new and different maps to your ECU through the User License UC Bridge.
- Receiving diagnostic information from the Taipan ECU.

Tuner License:

With this license, the tuner can create different maps, configurations and strategies designed for the rider's bike. The tuner can then flash them directly onto the ECU or send them via email to allow the rider to download and install them in the ECU.

*Please Note: For information regarding the UC-Bridge Tuner, Please contact one of our Aim technical team for further information.


Taipan ECU Connections - Optional Extra



The Taipan ECU has 4 connectors:

Main Connector - Compatible with most off-road bikes.
CAN Connector - Connects to the Handlebar Switch and Data Logger.
2nd CAN Connector - Connect to the UC Bridge, in order to communicate with the PC.
3rd Connector - Connect to spare analogue inputs and to a possible second injector.


Aim Handlebar Switch - Optional Extra



The Aim Handlebar Switch is the best way for changing the behaviour of your bike; it features 2 pushbuttons, 10 LEDs and manages the following settings:


Up to 5 selectable maps Apply fuel corrections
Activate traction control Activate launch control

The handlebar switch can also be used as a shift light module.


Visit Aim Academy Visit Aim Tech Support Download Race Studio Software

Technical 

AiM Taipan Second Injection Harness

  • JST Connector 08T-JWPF-VSLE-D
  • Red Wire - 12V Second INJ
  • Black Wire - Second INJ CMD
  • Full length - 2500cm



What's in The Box

AiM Taipan Second Injection Harness

  • Second injection harness - 2500cm

Video

Downloads

FAQ Centre

FAQ Centre