Aim Taipan Analogue Channels & Second Injection Harness
The Aim Taipan analogue channels and second injection harness is an optional cable for the Taipan ECU.
Key Features :
Analogue channels & second injection
JST connector
5 flying wires
Aim Taipan Accessories
The Aim Taipan analogue channels and second injection harness is an optional cable for the Taipan ECU.
The harness has a JST connector that connects to the Taipan ECU. Two flying cables for the second injection and three flying wires for analogue channels.
Below shows a functional diagram of products that can be added to the Taipan ECU:
UC Bridge - Optional Extra
The UC Bridge is the connection between the CAN bus of the ECCU and the USB port of your PC. It is available in 2 different licenses :
User License:
A Taipan ECU comes with some basic maps that already give you better performance than the stock maps. Highly professional tuners all over the world offer specific maps that better fit your requirements, managing, for example, different exhaust, two injectors etc.
The UC Bridge is required for two functions: - Transfer new and different maps to your ECU through the User License UC Bridge. - Receiving diagnostic information from the Taipan ECU.
Tuner License:
With this license, the tuner can create different maps, configurations and strategies designed for the rider's bike. The tuner can then flash them directly onto the ECU or send them via email to allow the rider to download and install them in the ECU.
*Please Note: For information regarding the UC-Bridge Tuner, please contact one of our Aim technical team for further information.
Taipan ECU Connections - Optional Extra
The Taipan ECU has 4 connectors:
Main Connector - Compatible with most off-road bikes. CAN Connector - Connects to the Handlebar Switch and Data Logger. 2nd CAN Connector - Connect to the UC Bridge to communicate with the PC. 3rd Connector - Connect to spare analogue inputs and to a possible second injector.
Aim Handlebar Switch - Optional Extra
The Aim Handlebar Switch is the best way for changing the behaviour of your bike; it features 2 push buttons, 10 LEDs and manages the following settings:
Up to 5 selectable maps
Apply fuel corrections
Activate traction control
Activate launch control
The handlebar switch can also be used as a shift light module.
Technical
Aim Taipan Analogue Channels & Second Injection Harness
JST Connector 08T-JWPF-VSLE-D
Two flying wires:
Red Wire - 12V Second INJ
Black Wire - Second INJ CMD
Three flying wires:
Black Wire - GND
White Wire - Spare Analogue 1
Blue Wire - Spare Analogue 2
Fill length - 2500mm
Video
What's in The Box
Aim Taipan Analogue Channels & Second Injection Harness
Analog Channels & Second Injection Harness 2500mm - Full Length
