Aprilia RSV4 AiM Solo 2 DL Motorcycle Cable & Bracket
SKU: APR-PP-APR-B
{{ product.metafields.descriptors.subtitle.value p5>
- 通常価格
- £120.00
- 通常価格
-
- セールスプライス
- £120.00
- 単価
- あたり
+ VAT(英国のみ)
Aprilia RSV4 AiM Solo 2 DL Motorcycle Cable & Bracket
The AiM Aprilia motorcycle cable & bracket set has been specifically designed to provide a simple and secure mounting solution for the AiM Solo 2 DL GPS Lap Timers.
Key Features :
Aprilia cable & bracket | 7 pin - 712 male binder connection |
Bracket suitable for Solo 2 & Solo 2 DL | |
Aprilia Solo 2 DL Cable & Bracket
The AiM ECU plug & play cable has been specifically designed for the Aprilia bike allowing easy installation to your Solo 2 DL via the 7 pin - 712 male connection cable. The ECU cable is an easy fitment to your bike and allows ECU data to be logged.
The AiM Aprilia bracket has been designed to provide a simple and secure way for mounting your Solo 2 DL GPS Lap Timer onto your bike.
Our brackets are supplied with all the necessary hardware required for fitting to your bike.
Please Note: The bracket is only compatible with RSV4 original triple clamp.
Also, If you are unsure this bracket will fit your bike, don't hesitate to contact one of our team. Either by email, phone or online chat.
Plug & Play
The plug & play cable currently fits the following Aprilia bike models:
Aprilia RSV4 RR/RF - From 2017 | Aprilia RSV4 1100 - From 2019 |
Aprilia Tuono V4 RR/Factory - From 2017 |
Example data protocols
Example data protocols sampled include RPM, Active gear, Vehicle speed, Front wheel speed, Rear wheel speed warning led, Engine coolant temperature, Brake pressure, Throttle position, Speed, ABS intervention, ALC intervention, Low fuel level, Traction control, Oil pressure, Map menu and many more. Refer to the technical sheet in the Downloads Tab for an extensive protocol list.
Please Note: For these models/years Aim recommends not to remove the stock dash. Doing so will disable some of the bike functions or safety controls.
Expand Your System
These are some of the items that can be added to your bike for incrementing performance and data.
Aprilia RSV4 AiM Solo 2 DL Motorcycle Cable & Bracket
- Specifically designed Aprilia RSV4 Plug & play cable and bracket for the Solo 2 DL
- Below is the pinout drawing for the Aprilia plug & play connection cable.
Aprilia RSV4 AiM Solo 2 DL Motorcycle Cable & Bracket
- Aprilia plug & play connection cable
- 1 bracket
- 1 Allen screw with rounded head M8 x 45mm
- 2 Allen screws with flat head M4 x 10mm
- 1 toothed washer
- 1 rubber dowel
Description
Aprilia RSV4 AiM Solo 2 DL Motorcycle Cable & Bracket
The AiM Aprilia motorcycle cable & bracket set has been specifically designed to provide a simple and secure mounting solution for the AiM Solo 2 DL GPS Lap Timers.Key Features :
Aprilia cable & bracket | 7 pin - 712 male binder connection |
Bracket suitable for Solo 2 & Solo 2 DL | |
Aprilia Solo 2 DL Cable & Bracket
The AiM ECU plug & play cable has been specifically designed for the Aprilia bike allowing easy installation to your Solo 2 DL via the 7 pin - 712 male connection cable. The ECU cable is an easy fitment to your bike and allows ECU data to be logged.The AiM Aprilia bracket has been designed to provide a simple and secure way for mounting your Solo 2 DL GPS Lap Timer onto your bike.
Our brackets are supplied with all the necessary hardware required for fitting to your bike.
Please Note: The bracket is only compatible with RSV4 original triple clamp.
Also, If you are unsure this bracket will fit your bike, don't hesitate to contact one of our team. Either by email, phone or online chat.
Plug & Play
The plug & play cable currently fits the following Aprilia bike models:Aprilia RSV4 RR/RF - From 2017 | Aprilia RSV4 1100 - From 2019 |
Aprilia Tuono V4 RR/Factory - From 2017 |
Example data protocols
Example data protocols sampled include RPM, Active gear, Vehicle speed, Front wheel speed, Rear wheel speed warning led, Engine coolant temperature, Brake pressure, Throttle position, Speed, ABS intervention, ALC intervention, Low fuel level, Traction control, Oil pressure, Map menu and many more. Refer to the technical sheet in the Downloads Tab for an extensive protocol list.Please Note: For these models/years Aim recommends not to remove the stock dash. Doing so will disable some of the bike functions or safety controls.
Expand Your System
These are some of the items that can be added to your bike for incrementing performance and data.Technical
Aprilia RSV4 AiM Solo 2 DL Motorcycle Cable & Bracket
- Specifically designed Aprilia RSV4 Plug & play cable and bracket for the Solo 2 DL
- Below is the pinout drawing for the Aprilia plug & play connection cable.
What's in The Box
Aprilia RSV4 AiM Solo 2 DL Motorcycle Cable & Bracket
- Aprilia plug & play connection cable
- 1 bracket
- 1 Allen screw with rounded head M8 x 45mm
- 2 Allen screws with flat head M4 x 10mm
- 1 toothed washer
- 1 rubber dowel
Downloads
FAQ Centre
- 選択を選択すると、ページ全体が更新されます。