AiM MXG Strada IVA Compliant 7" Dash Display Plug and Play Kit

+ VAT (UK Only)


AiM MXG Strada IVA Compliant Plug & Play Kit   The road legal - MOT approved, IVA compliant...

AiM MXG Strada IVA Compliant Plug & Play Kit


The road legal - MOT approved, IVA compliant digital dash display is a complete road legal display solution. 

Key Features:

  • 7"  high contrast TFT display
  • Road legal, MOT approved
  • CAN output
  • ECU connection
  • Wheel speed sensor
  • Simple connection harness

For OEM & Kit Car Builders

The Road legal-MOT approved, IVA compliant digital dash display is a complete road legal display solution for OEM, Kit car builders and race car builders.


The AiM MXG 1.2 Strada IVA Compliant dash kit has a 7" colour TFT display. It has an exceptional visual impact and configurable to show all the information coming from the Engine Control Unit (ECU), analogue / digital inputs, pre-defined math channels and the optional GPS Module.

Aim IVA Approved Plug & Play Kit Car Dash

This kit is the perfect solution for kit car builders. And our system allows you to see and monitor all ECU information and Odometer, Oil Temperature, Hazards, Main Beam, Engine Temperature, Front Fog, Dipped Beam, Fuel Level, Rear Fog, LH Indicator, Side Lights, Parking Brake, RH Indicator.

Connecting the MXG 1.2 Strada dash to your ECU is very simple. You can sample and display dozens of channels straight from the vehicles ECU. This is usually the quickest and easiest setup needing only 2 cable connections to the ECU instead of multiple connections to analogue sensors.


MXG Strada IVA Plug & Play Kit with additional 23 pin harness.


High Contrast TFT Display: its visual quality being always optimised as its ambient light sensor keeps the backlight at the best brightness levels.

Monitor data in pre-configured pages: MXG 1.2 Strada shows with RPM scale, all the data you need like speed, water temperature and oil pressure, lap times and much more... you can choose the custom pages you wish including up to four additional fields among a wide library of page styles, defining which data to be shown, their end of scale and measure units. Swapping between the pages is easy using the push buttons.


Flexible shift lights and alarms: The ten multi-coloured RGB shift lights can be customised to your liking defining the RPM threshold for each single gear. The same flexibility applies to the configurable RGB alarm LEDs, you can configure them in order to turn them on/off depending on analogue or digital inputs, ECU values, expansion values, math channels or optionally GPS information. You choose conditions and colours: select a solid alarm or flashing one and the flashing frequency. It is also possible to configure an accompanying text message, and set the alarm priorities.


CAN output: With the CAN output you can send messages directly to an existing CAN network in order to improve the range of vehicle control possibilities.


Digital output: MXG 1.2 Strada features a 1 amp digital output configurable in order to be activated/deactivated depending on the value of the analogue/digital inputs or on impulses coming from the ECU. This allows you to automatically run external systems, i.e. to switch on/off additional lights, to activate/de-activate a cooling fan or circulation pumps etc when a certain event happens.


Camera inputs: Two analog camera inputs are available, to switch your display into a mirror camera, through pushbutton command or event management. Extremely useful in cars such as a Lotus Exige where the rear visibility is poor.


Compare AiM Dashes

Prepare to unlock your potential

Our mission is to help educate you and enable you to get the most out of your AiM data equipment… whether you are new to racing or a seasoned professional, there is always something new to learn.

MXG 1.2 Strada Display with Road Icons

  • Display: 7" TFT
  • Resolution: 800x480 pixels
  • Contrast: 1000:1
  • Brightness: 700cd/m2-1,100 Lumen
  • Ambient light sensor: Yes
  • Alarm LEDs: 6 RGB freely configurable
  • Shift lights: 10 integrated freely configurable RGB LEDs
  • CAN connections: 2
  • ECU connection: + 1000 industry leading ECUs
  • Expansion CAN connection: GPS, Channel Expansion, TC Hub, Lambda Controller
  • Analog inputs: 8 fully configurable, max 1000 Hz each
  • Digital inputs: 1 speed input, coil RPM input
  • Digital outputs: 1 (1 A max)
  • Second CAN: Yes
  • Body: Anodized Aluminium
  • Pushbuttons: Metallic
  • Connectors: 2 AMP connectors + 1 Binder connector
  • Power consumption: 400 mA
  • Dimensions: 237x127.6x26mm
  • Weight: 950g
  • Waterproof: IP65


AiM MXG 360° View

MXG 1.2 Strada Display with Road Icons

  • MXG Strada 1.2
  • 23 Pin Loom
  • 14 Pin Loom
  • USB Cable
  • Wheel Speed Sensor
  • AiM Sticker