• 5" TFT display 

• 1000+ ECU connections 

• CAN output

• 10 RGB shift lights

• Two digital outputs

• Define up to 8 custom pages

• 14 pin harness

• Math channel

• 6 alarm LEDs

• 8 analog inputs

• Ambient light sensor

• Free race studio 3 download

 AiM MXS 1.2 Strada with Race Icons

The AiM MXS 1.2 Strada dash is one of the most widely used dashes on tracks and streets around the globe. The MXS 1.2 Strada dash has a 5" colour TFT display which has been designed to give a great visual impact, configurable to show all the information coming from the ECU analogue  / digital inputs, pre-defined math channels and an optional GPS Module.

The MXS 1.2 Strada has a wide contrast TFT display, its visual quality is optimised as its ambient light sensor keeps the back light at the best brightness.

Connecting the MXS 1.2 Strada dash to your ECU is very simple. You can sample and display dozens of channels from the vehicles ECU. This is usually the quickest and easiest setup needing only two cable connections to the ECU instead of multiple connections to analogue sensors.

The sampled data depends on the actual ECU but typically includes RPM, throttle position (TPS) oil, air, water temperature, oil pressure, battery voltage, speed gear lambda value (air, fuel ratio). There is a list of over 1000+ ECU drivers which are constantly being updated.

Pre-Configured Pages

The MXS 1.2 Strada shows together with the RPM scale showing the data you need like speed, water temperature, oil pressure, lap time and much more.

You can choose the custom pages you wish from a large library of page styles. You decide what data to be shown and the end scale and measure units. Also swapping between pages is easy using the pushbuttons.

High Contrast TFT Display

The MXS 1.2 Strada features a high contrast TFT display, its visual quality is always optimal as its ambient light sensor keeps the backlight at the best brightness levels.

Flexible Shift Lights and Alarms

The MXS 1.2 Strada has 10 multi-coloured RGB shift lights which can be customised to your liking to define the RPM threshold for each single gear. The same flexibility applies to the configurable RGB alarm LEDs. You can configure them in order to turn them on / off depending on the analogue or digital inputs, ECU values, expansion values, math channels or optional GPS08 information.

Two Digital Outputs

Not Enough

The Strada Logger Kit turns any MX Strada into a full-working data logger.

Our Aim Strada Logger Kit comprises of our Aim Strada Logger, Data Hub, GPS08 Module.

This kit will turn any MX Strada into a full working data logger which will be able to collect data ready to be analysed on Race Studio 3, also help you improve  your driver performance and identify any possible improvements in your vehicle setup.

Compare AiM Dashes

Prepare to unlock your potential

AiM MXS 1.2 Strada 360° Product View