Aprilia RSV4 RR/RF, 1100, Tuono V4 RR Factory AiM Solo 2 DL Plug & Play Lap Timer Kit

£520

Predictive Lap Timer & Data Logger  AiM Solo 2 DL with Plug & Play kit for Aprilia the most...

Predictive Lap Timer & Data Logger 

AiM Solo 2 DL with Plug & Play kit for Aprilia the most precise way to get lap times.

Key Features:


  • Predictive lap timing
  • Direct ECU data logging
  • Rechargeable internal battery
  • Multiple use modes: speed, times & performance
  • WIFI with security 
  • Internal 4 GB memory
  • Automatic GPS lap timer
  • Simple new open or closed track creation 
  • Configurable delta and split times
  • Multiple & configurable backlit graphical display
  • Database, with more than 4,000 tracks worldwide
  • Automatic Start / Stop
  • 712 male connector, 7 pin cable


Aprilia Plug & Play Kit

Connect the Solo 2 DL to your Aprilia ECU and get all the engine performance information you need.

Whether you are on the track or the open road this data logger displays and records your engine parameters such as RPM, gear, throttle position, air temperature, speed and more. 

After your race upload your data to Race Studio 3 and examine your data.



This Kit is compatible with the following Aprilia bike models:


  • RSV4 RR/RF - from 2017
  • RSV4 1100 - from 2019
  • Tuono V4 RR/Factory  - from 2017



     Solo 2 DL with ECU Connection

    Connecting to over 1,000+ ECUs we are sure it will work for you.

    You can connect your Solo 2 DL to the ECU with the Aprilia Plug & Play kit to provide you with all your motorcycle information and power with just one cable.

    This plug & play cable is a 7 pin 712 male connector.

     



    The GPS technology used in this unit has been updated and now receives the data from three satellite constellations, GPS, Glonass and Galileo; making for a significant improvement in data speed and positioning precision. This means that the start up time is reduced to a matter of seconds and lap times are accurate to a tolerance of two hundredths of a second.




    Coil RPM Input

    Solo 2 DL now features a digital input allowing to log RPM either from square wave signals (8-50V each signal) or pulse signals (150-450v) ignition coli trigger-primary circuit.


    Multiple Configurations Management

    Solo 2 DL can receive up to 10 configurations at one time allowing you to switch among them through keys.



    The power ON requires only a few seconds and lap times calculated with a max 2/100 sec of tolerance.

    Solo 2 DL gives instant Speed, Timing, Splits live data and predictive lap times.

     

    Solo 2 DL screen can be back lit in one of seven available colours

     

    Predictive Lap Timer

    The Solo 2 DL has 10 configurable RGB LEDs, and will give you a clear and fast indication of the comparison with your last lap. Predictive page: shows the predicted current lap time in the format you set.

    +/- in relation to the Reference Lap Predicted Lap Time.

    You can custom build the layout of the display to show the information you choose on 4 reconfigurable pages your data shown in your way see an example below.




    Solo 2 DL Data Recall Modes

    Solo 2 DL can manage two types of data or races:

    In each of these configurations, Solo 2 DL gives the complete information during the test, with the data ready to view on the Solo 2 DL or Race Studio Analysis software immediately after each race or test session.


    Data Recall on Screen Data

    At the end of your test you can quickly review all the key information on your display, RPM, Temps Times ECT.




    Make it even better and add Multiple cameras to your Solo 2 DL







    Wi-Fi Communication with the PC

    With wifi connectivity you can transfer your data securely and quickly to your laptop or computer without cables.




    Solo 2 DL New Track Creation and our Track Database


    Making use of GPS technology, the Solo 2 DL is pre-loaded with a database of over 4,000 tracks from all over the world so that as soon as the unit is switched on, it identifies its position and loads the start line coordinates ready to begin recording lap times. If, however, the particular track that you are at is not recognised, the Solo 2 DL automatically enters auto-learning mode and begins to build the track layout based on your car position and records the lap times.





    Prepare to unlock your potential




      • Display - Graphical
      • Display resolution - 238x00 pixels
      • Display pages - Up to 5 freely configurable
      • Back light - 7 configurable RGB colours
      • Shift lights / alarm LEDs - 10 configurable RGB LEDs
      • Integrated track database - Yes
      • Intertial platform - Internal 3 axis +5G accelerometer + 3 axis gyro + 3 axis magnetometer
      • Wi-Fi connection - Yes
      • GPS - 10Hz
      • External power - 12 V
      • Memory - 4 GB
      • Battery type - Rechargeable Lithium
      • Push buttons - Metallic
      • Dimensions - 98.0x73.7x30.2 mm
      • Weight - 240g battery included
      • Waterproof - IP67
      • ECU connection - CAN, RS232 or K-Line to 1,000+ industry leading 

       


      AiM Solo 2 DL 360° Product View


       

      • Aim Solo DL 2  Motorcycle Lap Timer
      • Power cable with AC adapter
      • Mounting bracket with screws
      • User manual
      • Aim sticker





      • Aprilia Plug & Play Cable