MV Agusta F3 & F4 AiM Solo 2 DL & SmartyCam 2.2 GP HD Motorcycle Plug & Play Lap Timer Track Day Kit


+ VAT (UK Only)

Order before 3pm - For same day dispatch *

MV Agusta F3 & F4 AiM Solo 2 DL + SmartyCam 2.2 GP HD Motorcycle Plug & Play Lap Timer Track Day Kit

The MV Agusta plug & play kit combined with the Solo 2 DL and SmartyCam GP HD gives you the ultimate track day experience.

Key Features :

Direct ECU data logging Predictive lap timing
Up to 8 configurable display pages Integrated GPS & GLONASS receiver
Automatic track recognition Internal 4 GB memory
Wi-Fi connection 10 configurable RGB LEDs
Database with more than 4,000 tracks worldwide MV Agusta ECU connection cable
Multiple-use modes: speed, Time, performance 7 different colour backlights

Predictive Lap Timer & Data Logger

This ultimate track day kit has been specifically designed for MV Agusta bikes. The kit includes a plug & play interface cable for your bike. A Solo 2 DL to give you the most precise lap times and the incredibly robust SmartyCam GP HD to record your races and provide all the technical layovers to help improve your performance. Also added is our GP HD bullet camera clamp mount to enable you to position the bullet camera on your bike. Connecting the Solo 2 DL to your MV Agusta ECU will give you all the engine performance information you need to help improve your driving performance.

SmartyCam GP HD 2.2 Features:

TFT colour display Full HD recording
Real-time overlay videos Automatic start/stop
Configurable Choice of lens - 67°, 84°, 120°

Plug & Play

The plug & play cable currently fits the following MV Agusta bike models:

F3 675 - From 2012 F3 800 - From 2012
F4 1000 - From 2013

Powerful Combination

AiM Solo 2 DL is the most precise GPS lap timer there is with the ability to show you your lap time live as you drive. Receiving data from two satellite constellations from anywhere on the globe by using GPS and Glonass also giving you a significant improvement in data speed and positioning precision.

This all adds up to your startup time being reduced to a matter of seconds and lap times are accurate to a tolerance of two-hundredths of a second.

Easy Connection

The MV Agusta ECU interface cable provides a plug & play solution for connecting the Solo 2 DL lap timmer to your bike. Please refer to the technical sheet on how to connect the ECU cable to your bike.

The sampled data you record depends on the actual ECU but typically includes RPM, engine load, throttle position (TPS), oil, air, water temperature, oil pressure, battery voltage, speed, gear and lambda value (air/fuel). The list of ECUs is forever growing and being updated.

With the added SmartyCam GP HD 2.2 camera you create an even more powerful system to help provide great videos that include all the technical information to help improve your performance.

The SmartyCam GP HD has four connections, one that is completely dedicated to the bullet cam, one for the ECU-MIC, one for a GPS Module connection and EXP to connect to the Solo 2 DL.

Please Note: For these models/years Aim recommends not to remove the stock dash. Doing so will disable some of the bike functions or safety controls.

Predictive Lap Timer

The GPS technology provides better reliability from the predictive lap timing function so you can see in real-time how your current lap compares to your best lap. The LEDs are also configurable to give a visual indication of whether you are quicker or slower. You can also build the layout of the display to show the data you want to see.

Solo 2 DL gives instant speed, timing splits live data and predictive lap times.

The Solo 2 DL has a sharp, high contrast display which helps drivers easily identify the data displayed on the screen. The Solo 2 DL also features a selection of 7 different backlight colours which can be selected to suit your requirements.

SmartyCam GP HD 2.2

The AiM SmartyCam GP HD 2.2 has been engineered to provide great videos and overlay all the technical data you want to see to help improve your performance while racing. The SmartyCam GP HD is used worldwide, giving racers on circuits, open course or road racing fantastic high definition, high frame rate videos with all the data overlayed to help improve your performance. It's easy to install, robust, reliable and can withstand the extreme working conditions expected by the track or road.

The SmartyCam GP HD 2.2 has a wide TFT colour display. Intelligent settings allow the camera to automatically start/stop recording by using the inbuilt 3 axis accelerometer, so you can concentrate on the track and not the camera, and immediate playback helps with setting up.

The Bullet is robust and lightweight making it easy to install on your bike. The connection cable from the recorder box to the bullet has been engineered to be strong and ensure connections are constantly connected through vibrations and more protected by Electromatic noise. We have a wide range of brackets available to suit your requirements.

Automatic Start/Stop

When you're getting ready to race the last thing you want to be doing is fumbling around with your camera. The SmartyCam HD has been designed with this in mind and switches on/off automatically and starts/stops recording in the same way.

The SmartyCam HD can be switched on by the logger it is connected to. Switch-off is automatic too, you decide after what period of non-activity the camera will switch off.

Recording can also be started/stopped automatically or via the keyboard. With an automatic switch-on, the camera will start recording when the speed or RPM threshold is exceeded. In this case, you can simply decide how long after dropping below the selected threshold the video will automatically stop.

Solo 2 DL New Track Creation And Our Track Database

Solo 2 DL allows you to simply create a new temporary or permanent track layout whether it's a point to point run for rallying or a closed-loop track it can simply be added to the solo 2 and PC database.

Simply put, if there is no track already, the Solo 2 DL will create a new one for you.

With over 4000 tracks pre-loaded from around the world. As soon as it's switched on the Solo 2 DL identifies its position. Then once you start to drive it automatically recognises the start line coordinates of the track and will start sampling lap times every time you go past.

WiFi Communication With The PC

The Solo 2 DL has integrated Wi-Fi, so if you want to review your data in more depth simply transfer your data securely and quickly onto a laptop or computer up to 50m away without the need for connectors and cables. You can then import the data into the Race Studio 3 software.

Expand Your System

These are some of the items that can be added to our Solo 2 DL for incrementing the performance and data acquired.

Configure & Analyse with Race Studio 3


With Race Studio 3 you can create, modify, delete, import and export configurations with all channels, ECU drivers, Math channels, Display Pages, Digital outputs, Alarms, Shift Lights and all the expansions you need. You will also be able to manage the map of all your racing tracks and compare two laps watching the video recorded by SmartyCam HD cameras.


With Race Studio 3 you can also analyse all data recorded by Solo 2 DL and downloaded to your PC: graphs, histograms and tables will help you study your performance, providing an objective support to avoid mistakes and improve performances.

Visit Aim Academy Visit Aim Tech Support Download Race Studio Software

MV Agusta F3 & F4 AiM Solo 2 DL + SmartyCam 2.2 GP HD Motorcycle Plug & Play Lap Timer Track Day Kit

  • Display: Graphical
  • Display Resolution : 238 x 99 pixels
  • Display Pages: Up to 8 freely configurable
  • Backlight: 7 configurable RGB colours
  • Shift lights/alarm LEDs : 10 configurable RGB LEDs
  • Integrated track database: Yes
  • Inertial platform : Internal 3 axis +5G accelerometer + 3 axis gyro +3 axis magnetometer
  • Wi-Fi connection: Yes
  • GPS: 10 Hz
  • ECU connection: CAN, RS232 or K-Line to thousands of industry-leading ECUs
  • External power: 12 V
  • Connectors : 1 socket (binder) 712, 5 pins, 1 socket (binder) 712, 8 pins
  • Memory: 4 GB
  • Battery type: Rechargeable Lithium
  • Pushbuttons: Metallic
  • Dimensions : 98.0 x 73.7 x 30.2mm
  • Weight: 249g, battery included
  • Waterproof: IP67
  • SmartyCam GP HD 2.2
  • Video format: H.264 1280 x 720 pixels @ 30 fps
  • Display resolution: 2.4" 240 x 320 pixels
  • Lens: Telecretreic with 6 elements
  • Field of view: 67°, 84°, 120°
  • Internal battery: Rechargeable Lithium Battery 1,500mAh
  • Battery charge: 700 mAh 12V
  • Internal Battery Duration: 60-70 min of recording
  • External power: 9-15V
  • Memory Capability:
  • 1.5 GB (1-hour low-quality recording)
  • 2 GB (1-hour medium quality recording)
  • 4 GB (1hour high-quality recording)
  • Accelerometer: Three-axial + 5G
  • Usage temperatures: -10°C/+60+C
  • Auto power ON: Yes, if connected to an AiM Logger
  • Auto power OFF: Yes
  • Auto Start/Stop: Yes
  • Body: Anodized Aluminium
  • Dimensions: Main unit 104.6 x 79.6 x 26.6mm
  • Bullet camera: 24 x 48.2mm
  • Connectors: 3 binder 712 connectors + 1SMA female connector
  • Bullet cable length: 2m
  • Weight: Main Unit 329g - Bullet 45g
  • Waterproof: IP67

Please refer to the Technical sheets in the Downloads Tab for all other diagrams for Solo2 DL and SmartyCam GP HD 2.2.

Below is the pinout drawing for the MV Agusta plug & Play connection cable.

Solo 2 DL & SmartyCam GP HD Product View

MV Agusta F3 & F4 AiM Solo 2 DL + SmartyCam 2.2 GP HD Motorcycle Plug & Play Lap Timer Track Day Kit

  • Solo 2 DL
  • Power cable with AC adapter
  • Mounting bracket with screws
  • SmartyCam GP HD 2.2 - Bullet Cam
  • External CAN cable 2m
  • External power cable
  • Battery charger with AC power adaptor
  • SmartyCam GP HD camera clamp mount
  • MV Agusta Plug & Play connection cable

FAQ Centre