Aim Absolute Boost Pressure Sensor 0-5 Bar
The Aim 0-5 Bar absolute boost pressure sensor is suitable for manifold air pressure, reading pressures up to 5 bars.
Key Features :
| 0-5 Bar |
4 pins 719 male binder |
Aim Absolute Boost Pressure Sensor 0-5 Bar
The Aim Absolute boost pressure sensor, fitted with a male four pin black 719 binder plug connection, suits all Aim loggers and dash display/loggers.
Stock vehicle boost sensors are often slow to react and low resolution, offering limited logging and therefore using analysis software.
The Aim sensor is high resolution, fast responding and above all reliable, making it perfect for anyone serious about keeping their turbo engine in good health and tuning boost to its most efficient level. Suitable for manifold air pressure reading (MAP), read the depression to -1 bar about atmospheric pressure and absolute pressure up to 5 bars.
This sensor is available with -3 JIC (3/8-24 UNF) ot M10 threads.
Connections
MXS / MXP / MXG / MXL (Strada and Pista) / MXL2 / EVO5 / MXm etc harnesses are fitted with 719 connections. To extend the length between your dash display/logger and the analogue sensor, please use the 719 - 719 patch lead, which is available in various lengths from 0.5 - 3 metres. For most installations, you will need one of these leads.
EVO4 / EVO4S logger / Channel Expansion are fitted with 712 connections and require a 712 - 719 patch lead to connect these sensors.
Technical
Aim Absolute Boost Pressure Sensor 0-5 Bar
-
Supply: 8-16V
-
Accuracy: < +/- 0.5% FS (CLNH – combined non-linearity and hysteresis)
-
Characterisation: 500 mV/ 0 bar 4500 mV/ 5 bar
-
Consumption: < 10 mA
-
Temperature working range: from -20°C to 135°C
-
Sealing: IP66
-
Housing: 316 stainless steel
-
Weight: 30g
-
Cable Length: 400mm
What's in The Box
Aim Absolute Boost Pressure Sensor 0-5 Bar
- Aim bar pressure sensor 0-5 Bar
Downloads
