AiM MXS Strada Motorcycle Dash Display with Road Icons

+ VAT (UK Only)


AiM 5" MXS 1.2 Strada Display with Road Icons   The MXS Strada with road icons is one...

AiM 5" MXS 1.2 Strada Display with Road Icons


The MXS Strada with road icons is one of the most widely used dashes on tracks and streets all over the world.

Key Features:

  • 5" TFT display
  • 1000 + ECU connections
  • CAN output
  • 10 RGB shift lights
  • Two digital outputs
  • Define up to 8 custom pages
  • 14 pin harness 
  • Math channel
  • 6 alarm LEDs
  • 8 analog inputs
  • Ambient light sensor
  • Free race studio 3 

The AiM MXS 1.2 Strada features a low side type - (switch to ground) digital output configurable ignorer 
tone activated/deactivated depending on the value of the analog/digital inputs or on pulses coming from the ECU.

This permits to automatically run external systems, to switch on/off additional lights, to activate, deactivate a cooling fan or circulation pumps when a certain event happens.

Aim MXS Strada with Road Icons

The AiM MXS 1.2 Strada dash is one of the most widely used dashes on tracks and streets around the globe. The MXS 1.2 Strada dash has a 5" colour TFT display which has been designed to give great visual impact, configurable to show all the information coming from the ECU analogue / digital inputs, pre-defined math channels and an optional GPS Module.

The MXS 1.2 Strada has a wide contrast TFT display, its visual quality is optimised as its ambient light sensor keeps the back light at the best brightness.

Connecting the MXS 1.2 Strada dash to your ECU is very simple. You can sample and display dozens of channels straight from the vehicles ECU. This is usually the quickest and easiest setup needing only 2 cable connections to the ECU instead of multiple connections to analogue sensors.

The sampled data depends on the actual ECU but typically includes RPM, throttle position (TPS) oil, air, water temperature, oil pressure, battery voltage, speed gear lambda value (air, fuel ratio). There is a list of over 1000+ ECU drivers which are constantly being updated.

Pre-Configured Pages

The MXS 1.2 Strada shows together with RPM scale showing the data you need like speed, water temperature, oil pressure, lap times and much more.

You can choose the custom pages you wish from a large library of page styles. You decide what data to be shown and the end scale and measure units. Also swapping between pages is easy using the Pushbuttons.


High Contrast TFT Display

The MXS 1.2 Strada features a high contrast TFT display, its visual quality is always optimal as its ambient light sensor keeps the backlight at the best brightness levels.

Flexible Shift Lights and Alarms

The MXS 1.2 Strada has 10 multi-coloured RGB shift lights which can be customised to your liking to define the RPM threshold for each single gear. The same flexibility applies to the configurable RGB alarm LEDs. You can configure them in order to turn them on / off depending on analogue or digital inputs, ECU values, expansion values, math channels or optionally GPS information.

You can choose the conditions, colours. You can select a solid alarm or a flashing one, also the flashing frequency. You can also configure an accompanying text message, and set the alarm priorities.

Two Digital Outputs

MXS 1.2 Strada Connection Example

Below is an example of items that can be added to our MXS Strada for incrementing the performance and the data.


Compare AiM Dashes

Prepare to unlock your potential

Our mission is to help educate you and enable you to get the most out of your AiM data equipment… whether you are new to racing or a seasoned professional, there is always something new to learn.

MXS 1.2 Strada Display with Road Icons

  • Display: 5" TFT
  • Resolution: 800x480 pixels
  • Contrast: 600:1
  • Brightness: 700cd/m2-1,100 Lumen
  • Ambient light sensor: Yes
  • Alarm LEDs: 6 RGB freely configurable
  • Shift lights: 10 integrated freely configurable RGB LEDs
  • CAN connections: CAN, RS232 or K-Line ECU
  • Compatibility: + 1000 industry leading ECUs
  • Expansion CAN connection: GPS, channel expansion, TC hub, Lambda controller, SmartyCam HD
  • Analog inputs: 1 speed input, coil RPM input Digital outputs: 1 (1 A max)
  • Second CAN: Yes
  • Body: Anodised Aluminium
  • Pushbuttons: Metallic Connectors: 2 AMP connectors
  • Dimensions: 169.4x97x23mm
  • Weight: 480g
  • Waterproof: IP65




Search compatible ECU's by manufacturer supported by AiM

Click here >



MXS 1.2 Strada Display with Road Icons

  • MXS Strada 1.2 
  • USB Cable
  • 14 pins standard wiring
  • 23 pin connector + contact
  • Software installation CD
  • AiM Sticker