Product Code: X05SNVK301
The Aim Front Hub Speed Pickup Sensor is attached to the front kart spindle. Comes with a magnetic trigger that mounts to your front wheel.
Product Code: X08LCU05CAN0
Product code: X08LCU05CAN0 The Aim LCU One CAN Lamba Sensor and Controller Unit Interface allows you to perfectly tune the carburetion of your engine as well
Product Code: X05LSU490
Product code: X05LSU490 Aim LCU ONE Kart Sensor Only Aim Technologies are committed to supplying professional engineers quality Motorsport products. Our cables and accessories are well-engineered
Product Code: X08PWVV00R
Product code: X08PWVV00R Aim Power Valve Kart Sensor with Patch Lead. Aim Technologies are committed to supplying professional engineers quality Motorsport products. Our cables and accessories
Product Code: X05SNVB301
The Axle Speed Pickup Sensor is measures the wheel speed, using a non-contact sensor that needs a metallic trigger that passes in front of it.
Product Code: X05TTS01B0
The Infrared Tyre Temperature Sensor is specifically designed to measure the surface temperature of tyres, providing info for chassis tuning, tyre exploitation, and driver behaviour.
Product Code: X08TTK014120
Aim Tyre Temperature kit sensors is designed to measure the surface temperature of tires, providing important info for chassis tuning, tyre exploitation, and driver behaviour.
Product Code:
The Tyre Temp Bracket Kit is designed to mount the Tyre Temperature Sensors to the four brackets, to get temperature readings from all 4 tyres.
Product Code: SPM10P7127191504
Product code: SPM10P7127191504 Brake Pressure Sensor With Patch Lead 0-100 Bar Can be purchases with optional Inline T Piece M10 Fitting Aim Technologies are committed to supplying,
Product Code: 3CVTRM1003C-V02PCB15BTR
The Aim Mychron 4, Exhaust Temperature Sensor with 712 Patch Lead, accurately measures exhaust gas temperature using a sensor mounted in the exhaust header pipe.
Product Code: 3CVGAS807
The Kart Exhaust Gas Type K Thermocouple, accurately measures exhaust gas temperature using a (thermocouple) placed in the exhaust header pipe for faster data recording.
Product Code: X05GAS12A4510M
Aim Mychron 4 Exhaust Temperature Sensor with Yellow Mignon Plug KF TYPE
Product Code: X40GPS08AM0130-X08HB2GK0
Product code: X40GPS08AM0130-X08HB2GK0 Aim GPS 08 Kart With 2 Port Data Hub (Mychron 4 Only) Aim Technologies are committed to supplying professional engineers quality Motorsport products.
Product Code: SPM10P7127191504
Inline T Piece M10 Brake Line Fitting for Kart makes it possible to connect a sensor in the fuel line or in the oil line. You
Product Code: X05SNLPRS0
Aim Kart Brake Liner Pot 10mm. These small, lightweight but well-engineered cables, are amongst the best in the market place today. These are ideal for high precision data
Product Code: X05SNAFME0
Product code: X05SNAFME0 Kart Throttle Cable Sensor with Patch Lead and Rotational Pot . Aim instruments can measure the relative displacement between two different points using a
Product Code: X05TRM05A4514BPR
The Aim M5 Water Temperature Sensor and black plug is designed and engineered to accurately monitor optimum water temperature levels protecting the engine from overheating.
Product Code: X02RXMGC3SMP
Product code: X02RXMGC3SMP Aim Mychron Magnetic Lap Pick Up is for use on kart tracks already equipped with imbedded magnetic timing and scoring strips. Install with
Product Code: X05SNST01G
The Steering Angle Sensor With bracket measures the angle of the steering wheel. This is done in degrees, as, the driver turns the wheel you
Product Code: X05SOT14A4516MS-V02PCB15BTR
The Aim Mychron 4, Under Spark Plug to Mychon 4 Dash Temperature patch lead, is fitted under the spark plug to monitor critical engine temperature.
Product Code: X05SOT14A4516MS
The Aim Mychron 4 / Mychron 5, Under Spark Plug connector to Yellow Mignon cable, is fitted under the spark plug to monitor engine temperature.
Product Code: 3CVTRM1003C
Aim Mychron 4 Water M10 ROTAX Sensor Only
Product Code: 3CVTRM1003C-V02PCB15BTR
The Aim Mychron 4, M10 Water Temperature Sensor to Mychron 4 Dash patch lead (for Rotax Max) is used to monitor critical engine water temperature.